Electronic Components Datasheet Search
  English  ▼

X  

PLUS405-55 Datasheet(PDF) 2 Page - NXP Semiconductors

Part # PLUS405-55
Description  Programmable logic sequencer 16 횞 64 횞 8
PDF  16 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  PHILIPS [NXP Semiconductors]
Direct Link  http://www.nxp.com
Logo PHILIPS - NXP Semiconductors

PLUS405-55 Datasheet(HTML) 2 Page - NXP Semiconductors

  PLUS405-55 Datasheet HTML 1Page - NXP Semiconductors PLUS405-55 Datasheet HTML 2Page - NXP Semiconductors PLUS405-55 Datasheet HTML 3Page - NXP Semiconductors PLUS405-55 Datasheet HTML 4Page - NXP Semiconductors PLUS405-55 Datasheet HTML 5Page - NXP Semiconductors PLUS405-55 Datasheet HTML 6Page - NXP Semiconductors PLUS405-55 Datasheet HTML 7Page - NXP Semiconductors PLUS405-55 Datasheet HTML 8Page - NXP Semiconductors PLUS405-55 Datasheet HTML 9Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 2 / 16 page
background image
Philips Semiconductors Programmable Logic Devices
Product specification
PLUS405-55
Programmable logic sequencer
(16
× 64 × 8)
October 22, 1993
181
PIN DESCRIPTION
PIN NO.
SYMBOL
NAME AND FUNCTION
POLARITY
1
CLK1
Clock: The Clock input to the State and Output Registers. A Low-to-High transition on this
line is necessary to update the contents of both state and output registers. Pin 1 only
clocks P0–3 and F0–3 if Pin 4 is also being used as a clock.
Active-High (H)
2, 3, 5–9,
26–27
20–22
I0 – I4, I7, I6
I8 – I9
I13 – I15
Logic Inputs: The 12 external inputs to the AND array used to program jump conditions
between machine states, as determined by a given logic sequence. True and complement
signals are generated via use of “H” and “L”.
Active-High/Low
(H/L)
4
CLK2
Logic Input/Clock: A user programmable function:
• Logic Input: A 13th external logic input to the AND array, as above.
Active-High/Low
(H/L)
• Clock: A 2nd clock for the State Registers P4–7 and Output Registers F4–7, as above.
Note that input buffer I5 must be deleted from the AND array (i.e., all fuse locations “Don’t
Care”) when using Pin 4 as a Clock.
Active-High (H)
23
I12
Logic/Diagnostic Input: A 14th external logic input to the AND array, as above, when
exercising standard TTL or CMOS levels. When I12 is held at +10V, device outputs F0–F7
reflect the contents of State Register bits P0–P7. The contents of each Output Register
remains unaltered.
Active-High/Low
(H/L)
24
I11
Logic/Diagnostic Input: A 15th external logic input to the AND array, as above, when
exercising standard TTL levels. When I11 is held at +10V, device outputs F0–F7 become
direct inputs for State Register bits P0–P7; a Low-to-High transition on the appropriate
clock line loads the values on pins F0–F7 into the State Register bits P0–P7. The contents
of each Output Register remains unaltered.
Active-High/Low
(H/L)
25
I10
Logic/Diagnostic Input: A 16th external logic input to the AND array, as above, when
exercising standard TTL levels. When I10 is held at +10V, device outputs F0–F7 become
direct inputs for Output Register bits Q0–Q7; a Low-to-High transition on the appropriate
clock line loads the values on pins F0–F7 into the Output Register bits Q0–Q7. The
contents of each State Register remains unaltered.
Active-High/Low
(H/L)
10–13
15–18
F0 – F7
Logic Outputs/Diagnostic Outputs/Diagnostic Inputs: Eight device outputs which
normally reflect the contents of Output Register Bits Q0–Q7, when enabled. When I12 is
held at +10V, F0–F7 = (P0–P7). When I11 is held at +10V, F0–F7 become inputs to State
Register bits P0–P7. When I10 is held at +10V, F0–F7 become inputs to Output Register
bits Q0–Q7.
Active-High (H)
19
INIT/OE
Initialization or Output Enable Input: A user programmable function:
• Initialization: Provides an asynchronous preset to logic “1” or reset to logic “0” of all
State and Output Register bits, determined individually for each register bit through user
programming. INIT overrides Clock, and when held High, clocking is inhibited and F0–F7
and P0–P7 are in their initialization state. Normal clocking resumes with the first full clock
pulse following a High-to-Low clock transition, after INIT goes Low. See timing definition for
tNVCK and tVCK.
Active-High (H)
• Output Enable: Provides an output enable function to buffers F0–F7 from the Output
Registers.
Active-Low (L)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com