56F8365 datasheet(39/172 Pages) FREESCALE

39 / 172 page

Program Map

56F8365 Technical Data, Rev. 7

Freescale Semiconductor

Preliminary

After reset, the OMR MA bit can be changed and will have an effect on the P-space memory map, as shown

in Table 4-3. Changing the OMR MB bit will have no effect.

Table 4-4 shows the memory map options of the 56F8365/56F8165. The two right columns cannot be

used, since the EMI pins are not provided in the package; therefore, only the Mode 0 column is relevant.

Note: Program RAM is NOT available on the 56F8165 device.

Mode 1 – External Boot; Flash Memory is not secured; EMI configuration is

determined by the state of the EMI_MODE pin

1. Information in shaded areas not applicable to 56F8365/56F8165.

2. This bit is only configured at reset. If the Flash secured state changes, this will not be reflected in MB until the next reset.

3. Changing MB in software will not affect Flash memory security.

Table 4-3 Changing OMR MA Value During Normal Operation

OMR MA

Chip Operating Mode

Use internal P-space memory map configuration

1. Setting this bit can cause unpredictable results and is not recommended, since the EMI is not functional in this package.

Use external P-space memory map configuration – If MB = 0 at reset, changing this bit has no effect.

Table 4-2 OMR MB/MA Value at Reset1 (Continued)

OMR MB =

Flash Secured

State2,3

OMR MA =

EXTBOOT Pin

Chip Operating Mode

56F8365 Datasheet(PDF) 39 Page - Freescale Semiconductor, Inc