Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com2 / 3

introduced. This is typically insignificant com-

pared to the overall scan time of the network

when a few repeaters are used. If more than

four repeaters are used in series, the inter-

scan delay may need to be increased.

The repeater baudrate is set via rotary switch.

The baudrate on each side of the repeater

must be the same. Different rates would

cause the slow side to be overloaded with

messages from the fast side.