SECTION 9

SECTION 1

53

IndustrIal open-style control

fuse Block adapter Kit

HPS Spartan industrial control transformers up to and including 3000VA or 30 amps are available with

optional fuse block adapter kits. The Fuse Block Adapter Kit is designed to allow for the installation

of any third party after market fuse block assembly onto the industrial control transformer. The

transformer must be a unit that incorporates a molded terminal block on either the primary or secondary

side.

note: Hps does not provide any jumpers or appropriate fuses for any after market fuse block you install on the Hps spartan

industrial control transformer. the Hps fuse block adapter kit provides only the mechanical means of attaching a third party after

market fuse block. HPS does not recommend any specific fuse block or fuse supplier. For a recommended size of fuse, please see

page # 32.

note: only 1 fuse block adapter kit is required per transformer. fuse block adapter kit not available

on SP5000ACP and SP5000MQMJ standard units. Add 0.38” per fuse block adapter to overall depth

(column B) on units from 750 Va to 3000 Va when optional fuse block adapter is installed. for custom

units, optional fuse block adapter kit is only available on units up to 3000Va or 30 amps.

Kit part

number

applicable transformer

Part Number Suffixes

applicable

Va sizes

spfBaK1

Ar, Qr, Pr, KHr, Sr

50 to 500

spfBaK1

KHP, SP, nJ

50 to 1500

spfBaK1

ACP, mQmJ

50 to 3000

sample assembly drawing for

optional fuse Block adapter Installation

© Hammond Power Solutions Inc.

Data subject to change without notice.

optional accessories

finger Guards

HPS Spartan industrial control transformers up to and including 3000VA or 30 amps are available with

optional finger guards.

Note: Each finger guard supplies either the primary or secondary side. Finger guard option not

available on SP5000ACP and SP5000MQMJ standard units. Add 0.38” per finger guard to overall

depth (column B) on units from 50 VA to 500 VA and 0.31” to units from 750 VA to 2000 VA when finger

guard has been installed. For custom units, optional finger guards are only available on units up to

3000Va or 30 amps.

For detailed installation instructions of HPS Spartan transformers or the optional finger guards and fuse block adapter kits, please visit our

website under products and services - literature & resources - Instruction sheets - Control transformers.

or go to the following link: http://www.hammondpowersolutions.com/products/product_literature/instruction_sheets/control_transformers.php

part

number

applicable transformer

Part Number Suffixes

applicable

Va sizes

spfG1

Ar, Qr, Pr, KHr, Sr

50 to 500

spfG1

KHP, SP, nJ

50 to 1500

spfG1

ACP, mQmJ

50 to 3000

sample assembly drawing for

optional finger Guard Installation

(Only available for units supplied with either a primary

or secondary molded terminal block)

finger Guard

(Optional)

fuse Block adapter Kit

(Optional)