PI0128WSN datasheet(7/8 Pages) AMI

7 / 8 page

PI0128WSN, PI0256WSN, PI0512WSN

Engineering Data Sheet

Page 7 of 8

Revised March 21, 2002

Electro-Optical Characteristics

The following table lists the electro-optical characteristics.

Table 4. Electro-optical characteristics at 25 oC.

Parameters

Symbol

Min

Typical

Max

Units

Center-to-center spacing

µm

Aperture width

2500

µm

Pixel area

1.25x10-3

cm2

Fill factor 1

Quantum efficiency 1,2

Responsivity 1,2

3.5´10-4

C/J/cm2

Nonuniformity of response 3

+/-%

Saturation exposure 2

Esat

160

185

nJ/cm2

Saturation charge 4

Qsat

Average dark current 5

0.2

0.6

Spectral response peak

600

Spectral response range 6

180 – 1000

Notes:

1. Fill factor, quantum efficiency, and responsivity are related by the equation R = (qel/hc).QE.FF.A, where qe is the

charge of an electron and hc/l is the energy of a photon at a given wavelength. Responsivity is therefore given per

pixel.

2. At wavelength of 575 nm (yellow-green) and with no window.

3. Measured at 50% Vsat with an incandescent tungsten lamp filtered with an Schott KG-1 heat-absorbing filter.

4. Saturation charge specified for a video output bias of 4.5 volts.

5. Max dark leakage £ 1.5 x average dark leakage measured with an integration period of 500 ms at 25oC.

6. From 250-1000 nm, responsivity ³ 20% of its peak value.

PI0128WSN Datasheet(PDF) 7 Page - AMI SEMICONDUCTOR

PI0128WSN Datasheet(HTML) 7 Page - AMI SEMICONDUCTOR

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL