LRI2K datasheet(20/89 Pages) STMICROELECTRONICS

Part #	LRI2K

Description	13.56 MHz, 2048-bit EEPROM tag IC with 64-bit UID and kill code, ISO 15693 and ISO 18000-3 Mode 1 compliant

PDF	89 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

20 / 89 page

Bit representation and coding

LRI2K

20/89

Bit representation and coding

Data bits are encoded using Manchester coding, according to the following schemes. For

the low data rate, the same subcarrier frequency or frequencies is/are used, in this case the

number of pulses is multiplied by 4 and all times are increased by this factor. For the Fast

commands using one subcarrier, all pulse numbers and times are divided by 2.

5.1

Bit coding using one subcarrier

5.1.1

High data rate

A logic 0 starts with 8 pulses at 423.75 kHz (fC/32) followed by an unmodulated time of

18.88 µs as shown in Figure 12.

Figure 12.

Logic 0, High data rate

For the Fast commands, a logic 0 starts with 4 pulses at 423.75 kHz (fC/32) followed by an

unmodulated time of 9.44 µs as shown in Figure 13.

Figure 13.

Logic 0, High data rate x2

A logic 1 starts with an unmodulated time of 18.88 µs followed by 8 pulses at 423.75 kHz

(fC/32) as shown in Figure 14.

Figure 14.

Logic 1, High data rate

For the Fast commands, a logic 1 starts with an unmodulated time of 9.44 µs followed by 4

pulses at 423.75 kHz (fC/32) as shown in Figure 15.

Figure 15.

Logic 1, High data rate x2

37.76µs

ai12076

18.88µs

ai12066

37.76µs

ai12077

18.88µs

ai12067

LRI2K Datasheet(PDF) 20 Page - STMicroelectronics