Electronic Components Datasheet Search
  English  ▼

X  

LS-541 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers

Part # LS-541
Description  Liquid level float switch
PDF  2 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  ETC2 [List of Unclassifed Manufacturers]
Direct Link  
Logo ETC2 - List of Unclassifed Manufacturers

LS-541 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

  LS-541 Datasheet HTML 1Page - List of Unclassifed Manufacturers LS-541 Datasheet HTML 2Page - List of Unclassifed Manufacturers  
Zoom Inzoom in Zoom Outzoom out
 2 / 2 page
background image
Page 2
Liquid level float switch
LS-541
Data Sheet Ref: 90500256
Issue: 5.5
International Tel: +44 1732 861225
UK Sales Tel: 0845 345 7253
International Fax: +44 1732 861226
UK Sales Fax: 0845 345 7353
www.sontay.com
Whilst every effort has been made to ensure the accuracy of this specification, Sontay cannot accept responsibility for damage, injury, loss or
expense resulting from errors or omissions. In the interest of technical improvement, this specification may be altered without notice.
Installation
Dimensions
1. The LS-541should only be installed by a competent,
suitably trained technician, experienced in installation
with hazardous voltages. (>50Vac & <1000Vac or
>75Vdc & 1500Vdc)
2. Ensure that all power is disconnected before carrying out
any work on the LS-541.
3. Maximum cable is 2.5mm², care must be taken not to
over tighten terminals.
4. Before installation, test the float gently to ensure that the
micro switch is operational.
5. Screw the LS-541 into a 1” BSPT boss, (making sure
that the arrow is pointing UP) away from system ele-
ments that may cause turbulence or vibration. Ensure
that the float is not obstructed in its movement after in-
stallation.
6. If the switch is to be mounted outside, it is recom-
mended that the unit be mounted with the cable entry at
the bottom. If the cable is fed from above then into the
cable gland at the bottom, it is recommended that a rain
loop be placed in the cable before entry into the sensor.
7. Remove the front cover by removing the 4 screws and
lifting the lid separating it from the main body.
8. Feed the cable through the waterproof gland and termi-
nate the cores at the terminal block. Leaving some slack
inside the unit, tighten the cable gland onto the cable to
ensure water tightness.
9. Replace the lid and tighten the 4 screws after the electri-
cal connections have been made.
Do not under any circumstances remove the protective
cover without isolating the power to the switch.
Connections
The switching point is fixed and not adjustable.
Red
Common
Blue
Opens on rise
White Closes on rise
Earth



Html Pages

1 2


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com