Macromodels

TS912

12/19

5

Macromodels

5.1

Important note concerning this macromodel

Please consider following remarks before using this macromodel.

– All models are a trade-off between accuracy and complexity (i.e. simulation

time).

– Macromodels are not a substitute to breadboarding; rather, they confirm the

validity of a design approach and help to select surrounding component

values.

– A macromodel emulates the NOMINAL performance of a TYPICAL device

within SPECIFIED OPERATING CONDITIONS (i.e. temperature, supply

voltage, etc.). Thus the macromodel is often not as exhaustive as the

datasheet, its goal is to illustrate the main parameters of the product.

– Data issued from macromodels used outside of its specified conditions

(Vcc, Temperature, etc.) or even worse: outside of the device operating

conditions (Vcc, Vicm, etc.) are not reliable in any way.

In

Section 5.2 and Section 5.4, the electrical characteristics resulting from the use

of these macromodels are presented.

5.2

Electrical characteristics from macromodelization

5.3

Macromodel code

Applies to: TS912 (V

** Standard Linear Ics Macromodels, 1993.

** CONNECTIONS :

* 1 INVERTING INPUT

* 2 NON-INVERTING INPUT

* 3 OUTPUT

Table 6.

Symbol

Conditions

Value

Unit

0mV

10

V/mV

No load, per operator

200

µA

-0.2 to 3.2

V

2.96

V

30

mV

40

mA

40

mA

GBP

0.8

MHz

SR

0.3

V/

µs