PY264

Page 5 of 8

Document # EPROM102 REV OR

Input Pulse Levels

GND to 3.0V

Input Rise and Fall Times

3ns

Input Timing Reference Level

1.5V

Output Timing Reference Level

1.5V

Output Load

See Figures 1 and 2

AC TEST CONDITIONS

Figure 1. Output Load

Figure 2. Thevenin Equivalent

* including scope and test fixture.

Note:

Because of the ultra-high speed of the PY264, care must be taken when

testing this device; an inadequate setup can cause a normal functioning

part to be rejected as faulty. Long high-inductance leads that cause

supply bounce must be avoided by bringing the V

directly up to the contactor fingers. A 0.01 µF high frequency capacitor

is also required between V