PIMXRT804VCFP4A datasheet(117/119 Pages) NXP

117 / 119 page

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using NXP Semiconductors products, and NXP Semiconductors

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suitable and fit for the customer’s applications and

products planned, as well as for the planned application and use of customer’s

third party customer(s). Customers should provide appropriate design and

operating safeguards to minimize the risks associated with their applications

and products.

NXP Semiconductors does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessary testing

for the customer’s applications and products using NXP Semiconductors

products in order to avoid a default of the applications and the products or of the

application or use by customer’s third party customer(s). NXP does not accept

any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect the

quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors products

are sold subject to the general terms and conditions of commercial sale,

as published at https://www.nxp.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement

is concluded only the terms and conditions of the respective agreement

shall apply. NXP Semiconductors hereby expressly objects to applying the

customer’s general terms and conditions with regard to the purchase of NXP

Semiconductors products by customer.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or other

industrial or intellectual property rights.

Bare die — All die are tested on compliance with their related technical

specifications as stated in this data sheet up to the point of wafer sawing

and are handled in accordance with the NXP Semiconductors storage and

transportation conditions. If there are data sheet limits not guaranteed, these

will be separately indicated in the data sheet. There are no post-packing tests

performed on individual die or wafers.

NXP Semiconductors has no control of third party procedures in the sawing,

handling, packing or assembly of the die. Accordingly, NXP Semiconductors

assumes no liability for device functionality or performance of the die or

systems after third party sawing, handling, packing or assembly of the die. It is

the responsibility of the customer to test and qualify their application in which

the die is used.

All die sales are conditioned upon and subject to the customer entering

into a written die sale agreement with NXP Semiconductors through its

legal department.

Quick reference data — The Quick reference data is an extract of the product

data given in the Limiting values and Characteristics sections of this document,

and as such is not complete, exhaustive or legally binding.

Export control — This document as well as the item(s) described herein may be

subject to export control regulations. Export might require a prior authorization

from competent authorities.

Suitability for use in non-automotive qualified products — Unless this

document expressly states that this specific NXP Semiconductors product

is automotive qualified, the product is not suitable for automotive use.

It is neither qualified nor tested in accordance with automotive testing

or application requirements. NXP Semiconductors accepts no liability for

inclusion and/or use of non-automotive qualified products in automotive

equipment or applications.

In the event that customer uses the product for design-in and use in automotive

applications to automotive specifications and standards, customer (a) shall use

the product without NXP Semiconductors’ warranty of the product for such

automotive applications, use and specifications, and (b) whenever customer

uses the product for automotive applications beyond NXP Semiconductors’

specifications such use shall be solely at customer’s own risk, and (c) customer

fully indemnifies NXP Semiconductors for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond NXP Semiconductors’ standard warranty and

NXP Semiconductors’ product specifications.

Translations — A non-English (translated) version of a document, including

the legal information in that document, is for reference only. The English

version shall prevail in case of any discrepancy between the translated and

English versions.

NXP Semiconductors

Legal information

i.MX RT1060 Crossover Processors for Consumer Products, Rev. 4, 04/2024

Data Sheet: Technical Data

PIMXRT804VCFP4A Datasheet(PDF) 117 Page - NXP Semiconductors

PIMXRT804VCFP4A Datasheet(HTML) 117 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL