10

10 - 143

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Absolute Maximum Ratings

Outline Drawing

Vcc(Dig), Vcc(Amp), Vcc(RF)

+5.5 Vdc

Vtune

0 to +15V

Junction Temperature

135 °C

Continuous Pdiss (T=85 °C)

(derate 43.5 mW/C above 85 °C

2.17 W

Thermal Resistance

(junction to ground paddle)

23 °C/W

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

ESD Sensitivity (HBM)

Class 1A

Typical Supply Current vs. Vcc

Note: VCO will operate over full voltage range shown above.

Vcc (V)

Icc (mA)

4.75

300

5.00

330

5.25

360

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED

LAND PATTERN.

Part Number

Package Body Material

Lead Finish

MSL Rating

Package Marking

[3]

HMC512LP5

Low Stress Injection Molded Plastic

Sn/Pb Solder

MSL1

[1]

H512

XXXX

HMC512LP5E

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

[2]

H512

XXXX

[1] Max peak reflow temperature of 235 °C

[2] Max peak reflow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

MMIC VCO w/ HALF FREQUENCY OUTPUT

& DIVIDE-BY-4, 9.6 - 10.8 GHz

v00.0407