LT7184S datasheet(5/52 Pages) AD

5 / 52 page

Data Sheet

LT7184S

analog.com

Rev. 0

5 of 52

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the

product. This is a stress rating only; functional operation of the product at these or any other conditions

above those indicated in the operational section of this specification is not implied. Operation beyond the

maximum operating conditions for extended periods may affect product reliability and lifetime.

Thermal Resistance

Thermal performance is directly linked to PCB design and operating environment. Careful attention to PCB thermal

design is required.

Table 2. Thermal Resistance

PACKAGE TYPE

θJA3

θJC-TOP4

θJC-BOTTOM4

UNIT

LQFN1

31.0

29.2

2.6

(oC/Watt)

LQFN2

19.9

29.2

2.6

(oC/Watt)

Test Condition 1: Thermal impedance simulated values based upon use of 2S2P JEDEC FR-4 PCB 114mm x 76mm,

1.6mm thick in a one cubic foot sealed enclosure.

Test Condition 2: Thermal impedance simulated values based upon the demonstration board in still air.

θJA is the natural convection junction-to-ambient thermal resistance.

θJC-TOP and θJC-BOTTOM are the natural conduction junction-to-case thermal resistances.

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can

discharge without detection. Although this product features patented or proprietary

protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore,

proper ESD precautions should be taken to avoid performance degradation or loss of

functionality.

LT7184S Datasheet(PDF) 5 Page - Analog Devices