AT9029 TRI

10W LED COB Adjustable & Fixed head with

dimmable driver

Avail. In small, fixed & adjustable versions

Supplied with dimmable LED driver

Low-glare UGR 19 rating

Ideal for commercial, retail, showroom and

decorative

ORDERING INFORMATION

Order code

11670

Description

10W LED COB Downlight

w/Dimm Driver - 50Deg

beam - 70mm cut-out -

White - TRI CCT

Driver Type

Dimmable ( Phase cut)

Item Code

AT9029/SML/WH/TRI

EFFICIENCIES

Total System Efficiency

89 lm/W

The performance of each component of a luminaire is

demonstrated through its efficiencies, which together

determine the total system efficiency of the product. The

output of the LED chip is first multiplied by the optical and

thermal efficiencies to calculate the Luminaire efficiency.

However, this calculation does not consider the driver

efficiency. To determine the overall efficiency of the system,

the Luminaire efficiency must be multiplied by the driver

efficiency, which accounts for all losses in the system.

MECHANICAL

Adjustability

Fixed

Body Material

Aluminium

Diffuser Material

Glass

Product Finish

Powdercoated

Fitting Colour

White

IC Rating

IC-4

IC-4 rating has been conducted at the products maximum

working Temperature Range (C) in line with Australian

standards. This provides the required safety when covered

with insulation and used in Australian Environments.

Installation Type

Recessed

IP Rating

IP54 Front Face Only

ELECTRICAL

Electrical Rating

Class II

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%.

This effectively means that the voltage range of these

products are 216Vac - 253Vac or 240V +6%

Switch Type

Inline

System Max Wattage

10 W

Working Temp Range

-20 to 40 °C

LAMP

Macadam Steps (SDCM)

5-step MacAdam Ellipse

Beam Angle

50 °

CCT Configuration

TRI-CCT

Colour Rendering Index (CRI)

>80

Lamp/LED Current

230 mA

Lamp/LED voltage

36 V

UGR

<16

LED LIFETIME

Ambient Temp (°C)

25 °C

40 °C

L80B10

>55000 hrs

>55000 hrs

This rating defines the performance of the led within its

lifetime. L relates to lumen depreciation, where the

proceeding number gives the resultant lumen output at the

end of it reported lifetime. L70, would mean 30% lumen

depreciation which means 70% of its initial output and is

tested accordingly to TM-21. The B part refers to failures,

which can be define as the percentage of LEDs which fall

below the L value in the projected lifetime. A value of B10

refers to 10% failure and a value of B50 refers to 50% failure.

1300 438 658

sales@evolt.com.au

atomlighting.com.au

© 2025 Evolt