DNA Pro series

10K8 • 3K8

2196 Hilton Drive, Suite E Gainesville, GA, U.S.A 30501

Telephone: 877-419-5805

Email: info@danleysoundlabs.com

Audio Performance

Amplifier topology

Proprietary 5h Generation High Performance Class D

Amplifier modulation scheme

Low feedback, multiple loop, with feed-forward error correction

Dynamic range to amplifier output

Analog input, better than 113dBA typical

AES / DanteTM input, better than 114dBA typical

Gain (with all DSP level controls set to 0dB)

32dB

Frequency response, 4 Ohm load

Less than 7Hz to greater than 30KHz, 4 Ohms -2.5dB

Total harmonic distortion, THD

Less than 0.05% typical, 1KHz signal, AES17 filter, 4 Ohm load

Inter-channel crosstalk, worst case combination

Better than -85dBr at 1KHz and -75dBr at 10KHz

Slew Rate

Greater than 60V per microsecond typical

Damping Factor (ref 8 Ohms)

Greater than 800 at amplifier output

Maximum analog input level

+20dBu

Analog input sensitivity range for full output

0dBu to +20dBu, continuously adjustable

Analog input (four channels)

Input 20k Ohm, electronically balanced, link directly connected to analog input

Analog ground scheme

AES48 standard compliant

AES3 input (two audio channels, one connection)

Transformer isolated with unique active cable equalization for extended range

AES3 link (two audio channels, one connection)

Active AES3 signal regeneration. Automatic direct bypass to the AES3 input ensuring

the audio signal will still flow even when the amplifier is powered down

AES3 supported sampling rates

24KHz to 192KHz (auto locking)

Digital Signal Processing

Resolution

40 bit, proprietary LMD algorithms (Linea Micro Detail)

Sample rate

96kHz throughout

Physical inputs to DSP drive modules

8x analog, 2x AES, & 8x DanteTM inputs can be routed to eight DSP drive modules

Drive module input processing

Input signal routing, delay, gain, high pass filter, polarity, mute

EQ: 2x low shelf, 6x parametric, and high FIR shelving filter

Drive module output processing

Source, delay, gain, polarity, mute, high pass and low pass crossover filters, VX limiters

EQ: low shelf, 8x parametric / all pass, and high shelf filters

Preset management

10 snapshots for device wide setup, 50 presets for loudspeaker settings

Presets can be recalled to sets of outputs or individual outputs as required

Unique high performance processing

Overlays

Twelve additional independent overlays of EQ, Delay and Gain

Flexible grouping for effective control of many amplifier channels in large systems

Class leading VX limiters

See the ‘speaker protection systems’ section

LIR crossover filters

Linear Phase alignments without the compromises of FIR filters

Power Supply

Topology (main power supply)

3rd generation high performance Series Resonant

Internally stored energy

Greater than 600 Joules

Nominal mains input voltage range

85V to 240V Power supply automatically detects voltage and configures accordingly

Mains input frequency range

47Hz to 63Hz

Mains inrush current (max for <10ms)

6A at 115V and 12A at 230V