LED LIFETIME

LED Lifetime

>60000 hrs

This is the Reported LED Lifetime in Hours based on TM-21. Ektor does not list

the projected or calculated LED lifetime, which is normally longer as TM-21

Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be

reported". This Lifetime refers to the life of a single LED however the system life

is longer since the probability and binomial distribution of all LEDs in the system

means that the average led is performing above the specification and

compensates for the LEDs falling below.

Ambient Temp (°C)

25 °C

40 °C

L90B10

48000 hrs

47000 hrs

This rating defines the performance of the led within its lifetime. L relates to

lumen depreciation, where the proceeding number gives the resultant lumen

output at the end of it reported lifetime. L70, would mean 30% lumen

depreciation which means 70% of its initial output and is tested accordingly to

TM-21. The B part refers to failures, which can be define as the percentage of

LEDs which fall below the L value in the projected lifetime. A value of B10 refers

to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime,

the system will reach the defined lumen depreciation and the average led

failures is defined by the B rating. The B rating is defined in and tested to

IEC62717.

TM-21 Test Hours

10000 hrs

COLOUR TEMPERATURE

CCT

5000 K

Luminaire Lumens

34000 lm

All photometric data has a tolerance of ±10%. Luminaire lumens refers to the

exit lumens or delivered lumens from the luminaire.

DRIVER

Driver Type

1-10V dimmable

Flex & Plug or Lead Length

1500 mm

Wiring Type

Re-wireable Flex & Plug (3 pin)

PSTLM

0.014

Short Term Light Modulation (PstLM): The requirement is that PstLM should be

less than or equal to 1.0. This metric measures the short-term flicker severity

and ensures that flicker is not perceptible or is at a level that does not cause

discomfort or health issues.

SVM

0.012

Stroboscopic Visibility Measure (SVM): The requirement for SVM is that it

should be less than or equal to 0.4. The SVM metric assesses the visibility of the

stroboscopic effect, which can make moving objects appear to be stationary or

moving in discrete steps, thus ensuring that this effect is minimized in lighting

environments to prevent visual discomfort and safety hazards.

ENERGY SAVINGS SCHEME

Ipart Approval

Yes

REES Approval

Yes

VEU Approval

Yes

COMPLIANCE

Product Design Life

6 years

The product design life relates to the total product life which includes LEDs,

drivers and the enclosure. This is different to the LED lifetime which only refers

to the economical lifetime of the LEDs at which time the lumen output has

dropped below the L Value. The product design life is calculated at the

maximum ambient or working temperature of the product and takes into

account the Daily Use.

Daily Use

20 hrs

The Daily Use is the recommended time required to meet the product's design

life. Installations can exceed this time, however the product design life will be

reduced proportionally.

Standards

AS/NZS 60598.1

AS/NZS 60598.2.1

AS/NZS 61347.1

AS/NZS 61347.2.13

AS CISPR 15

WARRANTY

Commercial Use Warranty

5 RTB (Total 5 Years)

VIP Warranty

2 Onsite, 3 RTB (Total 5 Years)

VIP warranty is available to registered users and is subjected to additional terms

and conditions.

Warranty Operating Hours

15000 hrs

This product is provided with a warranty up until the stated warranty period or

until the stated warranty operating hours has been reached (whichever occurs

first).

DIMENSIONS

Product Diameter

280 mm

Product Height

184 mm

LINE DRAWINGS

EV/HOVER/CORE/200W/50K

Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE