The Embedded I/O Company

TAMC002-TM

MTCA.4 Rear-I/O µRTM for TAMC220

Application Information

The

TAMC002-TM

is

a

standard

Mid-Size/Full-Size

MTCA.4

compliant

Micro

Rear

Transition

Module

compatible to the TAMC220.

Two AirmaxVS connectors provide access to all IP I/O

lines of the TAMC220. The I/O lines are routed to three

VHD68 SCSI-V connectors in the front panel and also to

three 50-pin flat cable connectors that may be used for

rack internal wiring or laboratory use.

According to MTCA.4, the TAMC002-TM provides an I2C

EEPROM, an I2C temperature sensor and an I2C I/O

Extender device. The I/O Extender is used to provide

various management signals on the µRTM, with the

management being handled by the MMC of the TAMC220.

Technical Information

 Form Factor: PICMG MTCA.4 Rear Transition Module

 Board size: Double Mid-Size or Double Full-Size

 MTCA.4 compatible IPMI support

 I/O Connectors:

 VHD68 SCSI-V (front panel)

 50-pol. flat cable

 Front-Panel LEDs:

 Blue Hot-Swap LED

 Red Failure LED (LED1)

 Green Board OK LED (LED2)

 Operating temperature -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C)

TAMC002-TM-xxR: 448000h

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-17

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com