The Embedded I/O Company

TAMC100 Carrier for 1 IndustryPack®

Application Information

The TAMC100 is a standard single width Mid-Size/Full-Size

AMC.1 (PCI-Express) compliant carrier for one single-size

IndustryPack (IP) module used to build modular, flexible

and cost effective I/O solutions for applications in process

control, medical systems, telecommunication and traffic

control. A HD50 SCSI-2 type connector provides access to

all IP I/O lines.

The TAMC100 is a versatile solution to upgrade well known

legacy I/O solutions to a high performance form factor.

All IP interrupt request lines are mapped to PCIe INTA.

Alternatively Message Signaled Interrupts (MSI) can be

used. For fast interrupt source detection the TAMC100

provides a special IP interrupt status register.

The IP power lines are fuse protected by self healing fuses

and RF filtered. The operating temperature range is -40°C

to +85°C.

According to AMC.0, the TAMC100 provides an IPMI

compliant Module Management Controller (MMC) with

temperature monitoring and hot-swap support.

The TAMC100 is available as mid-size module or as full-

size module. Please note that the mid-size module has

restrictions to its usage because of a component height

violation. It is within the responsibility of the user to carefully

check if the mid-size module with its component height

violation can be used in his system. Otherwise damage of

the TAMC100 or its slot to be used in may occur! For more

information see the user manual TAMC100-DOC.

Technical Information

 Form Factor: PCIMG AMC.1 Module

 Board size: 180.6mm x 73.5mm

 Single width

 Mid-Size/Full-Size front panel

 Fabric Interface:

 PCIe single lane (x1) on AMC Port 4 (AMC.1

Type 1 compliant)

 IPMI V1.5 Support

 Front Panel LEDs:

 Blue Hot-Swap LED

 Red Fail LED (LED1)

 Green IP-Activity LED (LED 2)

 ANSI/VITA 4-1995 compliant interface to one

IndustryPack module

 IndustryPack slot: one single-size

 8/32 MHz interface, no DMA

 8 Mbytes IP memory space

 Routing of all IP interrupts to PCIe INTA/MSI, local

interrupt status register

 I/O access: HD50 SCSI-2 type connector

 Self Healing fuses and RF-filtering on all IP power lines

 Operating temperature: -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C): 633.000 h

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-09-20

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com