The Embedded I/O Company

TAMC200

AMC Carrier for 3 IndustryPacks®

Application Information

The TAMC200 is a standard double Mid-Size/Full-Size

AMC.1 (PCI-Express) compliant carrier for up to three

single-size or

one double-size and one single-size

IndustryPack (IP) modules used to build modular, flexible

and cost effective I/O solutions for all kinds of applications

like process control, medical systems, telecommunication

and traffic control. Three VHD68 SCSI-V (VHDCI/Champ)

type connectors provide access to all IP I/O lines.

The TAMC200 is a versatile solution to upgrade well

known legacy I/O solutions to a high performance form

factor.

All IP interrupt request lines are mapped to PCIe INTA,

alternatively Message Signaled Interrupts (MSI) can be

used. For fast interrupt source detection the TAMC200

provides a special IP interrupt status register.

The IP power lines are fuse protected by self-healing

fuses and RF filtered. The operating temperature range is

-40°C to +85°C.

According to AMC.0, the TAMC200 provides an IPMI

compliant Module Management Controller (MMC) with

temperature monitoring and hot-swap support.

Technical Information

 Form Factor: PCIMG AMC.1 Module

 Board size: 180.6mm x 146.5mm

 Double Mid-Size or Full-Size front panel

 Fabric Interface:

 PCIe single lane (x1) on AMC Port 4 (AMC.1

Type 1 compliant)

 IPMI V1.5 Support

 Front Panel LEDs:

 Blue Hot-Swap LED

 Red Fail LED (LED1)

 Green Power Good / Activity LED (LED 2)

 ANSI/VITA 4-1995 compliant interface to three

IndustryPack modules

 3 IndustryPack slots: three single-size IPs or one

single-size and one double-size IP

 8/32 MHz interface, no DMA

 8 Mbytes memory space per IP Slot

 Routing of all IP interrupts to PCIe INTA/MSI,

local interrupt status register

 I/O access: VHD68 SCSI-V (VHDCI/Champ) type

connector per IP

 Self-Healing fuses and RF-filtering on all IP power

lines

 Operating temperature: -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C): 250.000 h

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-17

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com