The Embedded I/O Company

TAMC890

16 Port Gigabit Ethernet Switch

Application Information

The TAMC890 is a standard single width Mid-Size / Full-

Size AMC.2 compliant 16 Port gigabit Ethernet Switch.

The TAMC890 supports four RJ45 front panel ports which

are compliant to IEEE 802.3ab for 10BaseT, 100BaseTX

and IEEE 802.3ab for 1000BaseT via CAT5 TP cable and

12 1.25G-SerDes/SGMII ports which are connected to the

AMC backplane connector.

The TAMC890 is AMC.2 Type E2 and Type 4 compliant.

The auto-sensing and auto-negotiation function detect and

configure automatically the data rate and the duplex

mode.

The

functionality

of

the

TAMC890

based

on

the

unmanaged Broadcom BCM5396 Gigabit Ethernet switch.

Front panel RJ45 ports are galvanically isolated from the

transceiver and switch.

Each channel provides a front panel LEDs to indicate the

different network activities.

The operating temperature range is 0°C to +70°C.

Technical Information

 Form Factor: PCIMG AMC.1 Module

 Board size: 180.6mm x 73.5mm

 Single width

 Mid-Size/Full-Size front panel

 Fabric Interface:

 AMC.2 Type E2 and Type 4 Interface

 6 additional GbE Ports on AMC port 12-15, 17

and 18

 IPMI V1.5 Support

 Front Panel LEDs:

 Blue Hot-Swap LED

 Red Fail LED (LED1)

 Green Power LED (LED 2)

 16 x Link / Status LED

 4 front panel RJ45 connectors

 16-Channel 10/100/1000BaseTX Ethernet-Switch

Broadcom BCM5396

 Auto-Sensing und Auto-Negotiation

 Integrated address management

 9KB Jumbo Frames

 4K VLAN

 Operating temperature 0°C to +70°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C)

TAMC890: 5240000h

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-17

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com