Makes Desoldering Clean and Easy

Metcal's MFR-1300 Desoldering System is a powerful, cost-

effective system with a small footprint. With 0.7 bar of vacuum

suction force, both the MR-1350 and MR-1351 have what it takes to

make through-hole desoldering clean and easy.

Each system includes a Desoldering Pistol with a large capacity,

easy to change solder collection chamber to ensure minimum

downtime. The pistol can easily be converted to a pencil grip for

additional control. Metcal offers a wide range of long life desoldering

tips that will keep your equipment working efficientl .

The MFR-1351 unit has both desoldering and soldering

capabilities, eliminating the need for two separate units. The MFR-

1351 uses SmartHeat®, a microprocessor controlled system which

operates at lower temperatures and eliminates calibration time.

The MFR-1300 series is the best choice for small or large

production environments which need exceptional desoldering and

soldering performance from a unit with a small footprint.

MFR-1300 Series Features and Benefits

• Self-contained internal pump and large capacity collection

chamber makes desoldering easy

• Pistol handpiece can easily be converted to a pencil grip

• SmartHeat® technology operates at lower and safer

temperatures and eliminates overshoot.

• No calibration required which saves money and down-time.

www.metcal.com

Technical Specifications

Part Number

MFR-1350 / MFR-1351

Input Line Voltage

100-240 VAC

Input Line Frequency

50/60Hz

Power Consumption

110W Max. (Power Supply MFR-PS1300)

Output Power

60 Watts Max*

Output Frequency

450 KHz

Idle Tip Temperature Stability

+/- 1.1°C (2°F) in Still Air

Ambient Operating Temperature

10 - 40°C (50 - 104°F)

Maximum Enclosure Temperature

55°C (131°F)

Noise level

< 55 dB

Vacuum Suction Force

0.7 bar (21” Hg at vacuum pump @ sea

level)

Power Cord (3-wire)

183cm (72”)

Desolder Hand-piece Cable Length

152cm (60”), burn proof, ESD safe

Solder Hand-piece Cable Length

122cm (48”), burn proof, ESD safe

Hand-piece Connector

8 pin power connector

Tip to Ground Potential

<2mV

Tip to Ground Resistance

<2 Ohms

Surface Resistivity

105 – 109 Ohms

Approvals

cTUVus, CE

Dimensions (approx.) W x D x H

170 x 200 x 152.5mm (7” x 8” x 6”)

Workstand Dimensions

100 x 200 x 100mm (4” x 8” x 4”)

* RF SmartHeat Technology provides greater power. For more details,

visit www.metcal.com/smartheat

Desoldering

pistol can easily

be changed to

a pencil grip for

additional control.

Large capacity

desoldering

collection

chamber is easy to

change, reducing

downtime

Metcal MFR-1300 Series

60W Dual Output System w/ Internal Pump

Data Sheet