121

Automatic Timing & Controls

800.727.5646

atcdiversified.com

Automatic Timing & Controls

800.727.5646

atcdiversified.com

Multi-Function Multi-Range Timer

WIRING

The ATC 652 is a micro-processor-based timer with a 4-1/2 digit LCD

display that can provide an indication of either preset time remaining

or elapsed. There are five timing ranges covering time values from

one millisecond to 199 hours 59 minutes. The unit has both an instan-

taneous relay output and a programmable relay output which can be

programmed for any one of 14 different timing modes.

The timing range and mode are selected with an internal DIP switch.

The time value is entered using the keypad on the front face. The

programmed values are retained in memory and are secured in memory

by a keypad lockout command. The keypad can also be used to perform

secondary functions such as reset, immediate time out, time inhibit,

changing the direction of the display, displaying the number of cycles

run, and clearing the cycle counter.

The Model 652 is housed in a standard 15-terminal, plug-in, round

case. Models are available for operation on either 120 VAC or 240 VAC.

DIMENSIONS (INCHES/MILLIMETERS)

• Five Time Ranges From 0.001 SEC

• Replaces Most Electro-Mechanical Timers

• Six Single-Cycle and Eight Repeat-Cycle Timing Modes

• Easy Programming 7/16" High LCD Display

• Sealed Faceplate

• Keypad Lockout of Time Setting

• Internal Cycle Counter

• Data Retention Memory with EEPROM Circuitry

(652-8-4000, 652-8-4001 Models)

• Data Retention Memory with Lithium Battery

(included with timer)

(652-8-5000, 652-8-5001 Models)

model 600-3-3950 surface mounting bracket

E205980