M48Z35AV

DC and AC parameters

15/24

4

DC and AC parameters

This section summarizes the operating and measurement conditions, as well as the DC and

AC characteristics of the device. The parameters in the following DC and AC Characteristic

tables are derived from tests performed under the Measurement Conditions listed in Table 6:

Operating and AC measurement conditions. Designers should check that the operating

conditions in their projects match the measurement conditions when using the quoted

parameters.

Table 6.

Operating and AC measurement conditions

Note:

Output Hi-Z is defined as the point where data is no longer driven.

Figure 10.

AC measurement load circuit

Note:

50pF for M48Z35AV.

Table 7.

Capacitance

Parameter

M48Z35AV

Unit

3.0 to 3.6

V

0 to 70

°C

pF

Input rise and fall times

≤ 5ns

Input pulse voltages

0 to 3

V

Input and output timing ref. voltages

1.5

V

AI03211

CL = 100pF or

5pF

CL includes JIG capacitance

645

Ω

DEVICE

UNDER

TEST

1.75V

Symbol

1.

Effective capacitance measured with power supply at 5V. Sampled only, not 100% tested.

2.

At 25°C, f = 1MHz.

Min

Max

Unit

Input capacitance

10

pF

(3)

3.

Outputs deselected.

Input / output capacitance

10

pF