Electrical Products Division

6801 River Place Blvd.

Austin, TX 78726-9000

http://www.3M.com/elpd

Litho in USA.

© 3M 2002 78-8126-0635-4-A

IMPORTANT NOTICE

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability

associated with such use.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of

purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,

special, incidental or consequential regardless of the legal theory asserted.

3M and Scotchlok are trademarks of 3M

Engineering Specification

Crimp-Type Female Disconnect Terminals shall,

electrically and mechanically, connect permanently to

a prestripped end of a stranded copper wire: and have a

tongue portion with fingers which grip a Male

Disconnect in a separable, reusable manner, forming

a Quick Connect Wiring Termination.

The connector line shall offer tongue variations (sized

to grip Male Tabs: 0.187˝ x .0.250˝) and barrel

variations in construction (non-insulated, nylon

insulated with insulation grip, etc.). The tongue

portion shall be marked with the wire range and

manufacturer’s symbol ( ).

The Nylon Fully Insulated 0.250˝ Female Disconnect

shall be tin plated 0.020˝ thick brass with a tongue for

gripping a 0.250˝ x 0.032˝ per ANSI/NEMA CD-2 and

a 0.25˝ long barrel covered by a nylon funnel entry

sleeve, which extends to cover the tongue, color coded

and sized for a specified (AWG) wire range (22-18,

16-14).

Insulated connectors shall be UL Listed and CSA

Certified for 600 V building wire: 1000 V signs or

lighting fixtures (luminaires) and temperature rated

221˚F (105˚C) maximum.

Female Disconnects shall be suitable for field or

factory wiring, with a UL Recognized strain relief

required.