Technical specifications

* There is a limit of 128 routable MAC addresses per

access point. This allows an Ethernet switch to be

attached to subscriber units (“Client” in image at

left), but limits to 128 the total number of Ethernet

devices to which the access point can connect.

** There is a limit of 16 active subcsriber units for

each access point. A total of 12 access points (in the

900 MHz band) can be deployed to support up to 192

fixed subscriber units across a given site.

• Radios are IP addressable*, with Remote

Configuration & Diagnostic Tools

• Radios Support Multiple IP Addresses at

Each Remote Node**

Ordering Information

AW900iTR

AW900iTR-PAIR

900 MHz Indoor Wireless Ethernet Radio

900 MHz Indoor Wireless Ethernet Bridge

Includes:

(1) AW900iTR Radio

(1) AW2-900 2.5 dBi Omnidirectional Antenna

(1) 110 VAC to 6 VDC power adapter

Includes:

(2) AW900iTR Radios

(2) AW2-900 2.5 dBi Omnidirectional Antennas

(2) 110 VAC to 6 VDC power adapters

© AvaLAN Wireless Systems Incorporated. All rights reserved. AvaLAN Wireless and the AvaLAN Wireless logo are registered trademarks of AvaLAN Wireless Systems Incorporated. All other trademarks are property of their respective owners.

AvaLAN Wireless makes no representations or warranties with respect to the accuracy, utility, or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time

without notice. No license, express or implied, by estoppel or otherwise, to any patents or other intellectual property rights is granted by this document. Particular uses or applications may invalidate some of the specifications and/or product

descriptions contained herein. The customer is urged to perform its own engineering review before deciding on a particular application. AvaLAN Wireless products are not designed for use in medical, life saving, or life sustaining applications.

06.18.2013

Copyright

:: AvaLAN Wireless Systems Inc. :: All rights reserved

<IP Addr.> 192.168.2.100

192.168.2.101

192.168.2.102

192.168.2.103

192.168.2.104

192.168.2.105

AW900iTR

<Access Point>

AW900iTR

<Client>

AW900iTR

<Client>

System diagram

PARAMETER

SPECIFICATION

RF transmission rate

1.536 Mbps

Ethernet throughput

935 Kbps

Output power

+21 dBm (4 Watts EIRP when used with 15 dBi antenna)

Receiver Sensitivity

-97 dBm at 10-4 BER

Range

40 miles line-of-sight with 15 dBi antenna

RF channels

12 non-overlapping channels with 2.0833 MHz spacing

Frequency selection

Automatic or manually selectable via web browser interface

RF Connector

RPTNC Female

Ethernet

RJ-45

Power Connector

P5 2.1 mm

Adjacent band rejection

SAW receiver filter attenuates cellular and pager interference

Mounting

DIN rail clip

Power regulation

Built-in switching regulator

Browser management tools

Statistics, Network Settings, Spectrum Analyzer, Firmware Upgrade

Power consumption

Transmit: 1.7 Watts Receive: 0.8 Watts

Voltage

9 to 48 VDC

Transmit current draw

140 mA at 12 VDC

Temperature range

-40º C to +70º C

Size

110 x 110 x 35 mm

Compatibility

Compatible with AW900xTR and AW900xTP radios