www.ti.com

FEATURES

1

2

3

4

5

6

7

14

13

12

11

10

9

8

1OUT

1IN−

1IN+

VCC

2IN+

2IN−

2OUT

4OUT

4IN−

4IN+

GND

3IN+

3IN−

3OUT

D OR PW PACKAGE

(TOP VIEW)

DESCRIPTION

LM2902-EP

SGLS335A – APRIL 2006 – REVISED APRIL 2006

QUADRUPLE OPERATIONAL AMPLIFIER

•

Common-Mode Input Voltage Range Includes

Ground, Allowing Direct Sensing Near

•

Controlled Baseline

Ground

– One Assembly/Test Site, One Fabrication

•

Differential Input Voltage Range Equal to

Site

Maximum-Rated Supply Voltage:

•

Extended Temperature Performance of -55

°C

– Non-V devices . . . 26 V

to 125

°C

– V-Suffix devices . . . 32 V

•

Enhanced Diminishing Manufacturing

Sources (DMS) Support

•

V-Suffix devices . . . 32 V D Open-Loop

Differential Voltage Amplification . . . 100

•

Enhanced Product-Change Notification

V/mV Typ

•

Qualification Pedigree

•

Internal Frequency Compensation

(1)

Component qualification in accordance with JEDEC and

industry standards to ensure reliable operation over an

extended temperature range. This includes, but is not limited

to, Highly Accelerated Stress Test (HAST) or biased 85/85,

temperature cycle, autoclave or unbiased HAST,

electromigration, bond intermetallic life, and mold compound

life. Such qualification testing should not be viewed as

justifying use of this component beyond specified

performance and environmental limits.

•

ESD Protection <500 V Per MIL-STD-883,

Method 3015; Exceeds 200 V Using Machine

Model C = 200 pF, R = 0); 1500 V Using

Charged Device Model

•

ESD Human Body Model >2 kV Machine

Model >200 V and Charge Device Model = 2

kV For K-Suffix Devices.

•

Low Supply-Current Drain Independent of

Supply Voltage . . . 0.8 mA Typ

•

Low Input Bias and Offset Parameters:

– Input Offset Voltage . . . 3 mV Typ

– Input Offset Current . . . 2 nA Typ

– Input Bias Current . . . 20 nA Typ

This device consists of four independent high-gain frequency-compensated operational amplifiers that are

designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies

is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices) and

VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is

independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier

circuits that now can be more easily implemented in single-supply voltage systems. For example, the LM2902

can be operated directly from the standard 5-V supply that is used in digital systems and easily provides the

required interface electronics without requiring additional

±15-V supplies.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2006, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.