Manual Switches

AML71/75 Series

Barriers/Panel Seal Accessories

56

Honeywell Sensing and Control 1-800-537-6945 USA

1-815-235-6847 International 1-800-737-3360 Canada

AML71 BARRIERS

Drawing shows two switches, slot mount-

ed. From left to right: one center barrier, a

second switch, plus another end barrier

to complete the arrangement.

When mounting an individual unit, an end

barrier is attached to each side of the

housing. The center barrier is used in a

slot mount array.

FEATURES

Barriers separate individually

mounted switches and indicators —

help prevent inadvertent actuation of

two pushbutton switches with a single

push.

Front of panel mounting simplifies

installation.

AML71 BARRIER ORDER GUIDE (See notes)

Barriers shown in order guide are black.

Barrier Length

Type

Catalog Listing

Short

Center

AML71SCB

(For use with square devices and short side

of rectangular devices.)

End

AML71SEB

Long

Center

AML71LCB

(For use with long side of rectangular

devices.)

End

AML71LEB

Notes:

Not for use with AML61 mounting hardware or any full guard bezel products.

Not for use with AML41J, K, or L lens type indicators; or AML45 annunciators.

AML75 PANEL SEAL

FEATURES

AML75 panel seals fit pushbutton

switches and indicators.

Provides protection from

contamination from accidental

beverage spills, dust, and dirt.

Easy to install, without tools

No effect on display color, light

intensity, or legend quality.

Replace seal or change lamps without

removing switch from panel.

For .19-inch standard height square or

rectangular pushbuttons.

Mounting dimensions page 65.

The design complements AML’s func-

tional appearance, creating a pleasing

framed effect around the button. It con-

sists of a matte black plastic base which

press-fits between the panel and switch

bezel, and a transparent flexible seal

which snaps into the base. PK 8521, ship-

ped with each order, provides installation

instructions.

Button colors and legends can be viewed

without distortion whether lighted or un-

lighted. Seals can be conveniently re-

placed or removed for relamping, without

removing the switch from panel.

Operating temperature range is 32° to

131°F(0° to 55°C).

AML75 PANEL SEAL ORDER GUIDE

For Use With:

Square .19

Rectangular .19

Description

high pushbuttons

high pushbuttons

Rockers

Base & Seal

AML75ABC

AML75BBC

AML75RBC

Base Only

AML75ABN

AML75BBN

—

Seal Only

AML75ANC

AML75BNC

—

Notes:

Multiple units should not be mounted in a

single slot, since this would create an

unsealed space between each unit.

AML75 seals are not for use with barriers,

full guard bezels, AML61 mounting hard-

ware, AML45 annunciators, or AML41J, K,

or L lens type indicators.

MATERIAL

Base: Polypropylene

Cap: Polyvinyl Chloride