For more complete information on any product, please visit our web site: www.aimtti.com

Measurably better value

Model

Outputs

Voltage / Current

Power

Interfaces

PL068

One

0 to 6V / 0 to 8A

48W

PL155

One

0 to 15V / 0 to 5A

75W

-

PL303

One

0 to 30V / 0 to 3A

90W

-

PL601

One

0 to 60V / 0 to 1.5A

90W

-

PL303QMD

Two

2 x (0 to 30V / 0 to 3A) 180W

-

PL303QMT

Three

2 x (0 to 30V / 0 to 3A)

+ 0 to 6V / 0 to 8A

228W

PL068P

One

0 to 6V / 0 to 8A

48W RS232/USB/LAN

PL155P

One

0 to 15V / 0 to 5A

75W RS232/USB/LAN

PL303P

One

0 to 30V / 0 to 3A

90W RS232/USB/LAN

PL601P

One

0 to 60V / 0 to 1.5A

90W RS232/USB/LAN

PL303QMDP

Two

2 x (0 to 30V / 0 to 3A) 180W RS232/USB/LAN

PL303QMTP

Three

2 x (0 to 30V / 0 to 3A)

+ 0 to 6V / 0 to 8A

228W RS232/USB/LAN

Brief specifications for main outputs:

Line & load regulation: <0.01%. Output noise: < 0.4mV rms.

Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits.

Sizes: singles - 105 x 130 x 290/315mm; dual - 210 x 130 x 290mm

triple - 315 x 130 x 290mm (WxHxD)

manual & bus programmable -

Laboratory Power Supplies

High performance power supplies

Single, dual and triple outputs

Linear regulation, 48W to 228W

Manual or bus programmable

RS-232, USB, LAN or GPIB











The New PL series represents the

successor to best-selling PL series which

became an “industry standard”.

This ultra-compact linear regulated

design retains the traditional analog

controls of the PL but adds important

digital features.

PL & PL-P series

Linear regulation provides ultra-low noise

Highly compact (¼ rack 3U) with small bench footprint

True analog controls with advanced digital features

Settings can be locked at the touch of a button

4 digit voltage and current meters on each output

Low current range with 0.1mA resolution

Constant voltage or constant current operation

Independent, tracking or true parallel modes (QMD & QMT)

High current (8A), high precision (1mV resolution) output

on PL303QMT

Front and rear power and sense terminals (PL-P models)

Analog remote control (PL-P single output models)

RS-232, USB and LAN/LXI interfaces (PL-P models)

GPIB optional

























The New PL series is the solution for users requiring

an advanced linear regulated precision bench

power supply that retains conventional analog

controls.

It’s ultra-compact design uses minimal space on the

bench or in the rack.

The New PL-P series offers the same manual

control features but adds full remote control using

analog, RS232, USB and LAN interfaces, the latter

conforming with LXI.

When working with any piece of equipment,

engineers tend to require a voltage source

variable over only a narrow range.

That’s where the V-Span function comes in.

It allows the user to redefine the end-stop

values of the voltage control to create a

specific voltage range.

For example - An engineer is working on a

circuit that will operate from four NiMh cells.

They use V-Span to set a Vmax of 5.8 volts

(to prevent over-voltage damage) and a

Vmin of 3.6 volts (to ensure that the circuit

doesn’t reset).

They now have a power supply which

provides high-resolution analog control over

the exact voltage range they need.

The New PL-P series offers a comprehensive set of digital interfaces

including RS232, USB and LAN (Ethernet) as standard, with GPIB

optional.

The LAN interface is compliant with LXI-C. LXI (LAN eXtensions

for Instrumentation) is the next-generation, modular architecture

standard for automated test systems, and is expected to become

the successor to GPIB in many systems.

For more information

concerning LXI visit:

www.

aimtti.com/go/lxi

High voltage versions of PL Series

Manual or bus programmable

90W power at 120V or 250V

RS-232, USB, LAN or GPIB









Model

Outputs

Voltage / Current

Power

Interfaces

PLH120

One

0 to 120V / 0 to 0.75A 90W

-

PLH250

One

0 to 250V / 0 to 0.375A 94W

-

PLH120-P

One

0 to 120V / 0 to 0.75A 90W RS232/USB/LAN

PLH250-P

One

0 to 250V / 0 to 0.375A 94W RS232/USB/LAN

Brief specifications for main outputs:

Line & load regulation: <0.01%. Output noise: < 2mV rms.

Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits.

Size: PLH - 105 x 130 x 290mm; PLH-P - 105 x 130 x 315mm

The PLH series has been developed from the New PL series (see

below) and retains all of its advanced features at output voltages of

120V or 250V.

Linear regulation offers the highest possible performance, and

the compact quarter-rack width design provides an impressive 90

watts of power. A low current range provides 0.01mA resolution.

PLH-P series units have the same comprehensive set of interfaces

as the PL-P (below), but with electrical isolation of the analog

inputs.

PLH & PLH-P series