Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White

PRODUCT ID: 3149

Description

You will chirp with delight when you see how easy it is to make your very own 8x16 LED

matrix display for any Feather. This kit combines two of our adorable miniature LED

matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have

got everything a big LED matrix has, but bite sized! Double them up for 128 total bright

white LEDs.

This is the White Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Combo Pack! We

Also have these combo packs in Blue, Green, Red, Yellow, and Yellow-Green.

Normally, wiring up 8x16 matrices would require a breath-taking 24 GPIO pins, which is

way too many pins. That's where this lovely 16x8 LED matrix backpack PCB comes in. It

contains a HT16K33 I2C LED matrix driver that does all the multiplexing work for you,

and is controlled over the two I2C pins. It's easy to use, has a portable library that runs

on any of our Feathers to turn on/off each LED.