| Electronic Components Datasheet Search |
|
UCC5340 Datasheet(PDF) 4 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
UCC5340 Datasheet(HTML) 4 Page - Texas Instruments |
|
4 / 6 page ![]() 4 UCC5340 UNITRODE CORPORATION 7 CONTINENTAL BLVD. • MERRIMACK, NH 03054 TEL. (603) 424-2410 FAX (603) 424-3460 The IrDA stream is a 1.6 microsecond or 3/16 th of a bit time pulse for each zero or start bit. The IrDA receiver must pick up the start bit to frame the character. The start bit must be passed to the UART to start the framing. This is critical to get the Start bit, the IR receiver can not be in saturation from the last information transfered from the system. This requires a fast receiver AGC system, amplifiers, and filters that are not in satura- tion. The receiver has to work over a very wide ambient IR level, from sunlit rooms to dark rooms. There is a wide range of background noise and ambient levels that must be filtered out. The receiver sees the light from the transmit side which can be at a much higher level than the received signal from another unit. The receiver must come out of satura- tion fast to recover to pick up the first start bit. Units that are designed for low power will only use the 1.6 microsecond transmit pulse, others that are not con- cerned with power may use the 3/16 th of the bit time over the range of 2400, 9600, 19.2k, 38.4k, 57.6k, and 115.2k BPS. The shortest pulse width allowed is 1.41 mi- croseconds, the longest pulse at 2400 BPS is 88.55 mi- croseconds. Bit Rate Bit Rate Tolerance Pulse Width Mini- mum Pulse width 3/16 Nominal Pulse Width Maxi- mum Kbits/second % of Bit Rate microseconds microseconds microseconds 2.4 ± 0.87 1.41 78.13 88.55 9.6 ± 0.87 1.41 19.53 22.13 19.2 ± 0.87 1.41 9.77 11.07 38.4 ± 0.87 1.41 4.88 5.96 57.6 ± 0.87 1.41 3.26 4.34 115.2 ± 0.87 1.41 1.63 2.71 IrDA Standard for Speed and Tolerance APPLICATIONS INFORMATION (cont.) The UCC5340 low pass filter input should be bypassed with a 10 µF low ESR tantalum capacitor positioned as close to VCAPDET as possible. Connections to the photodiode input should be short, surrounded by ground, and as direct as possible to reduce stray capacitance and noise pickup. To obtain maximum performance, a sepa- rate ground plane and metal EMI shield are recom- mended. The optical port surface of the transmit LED and photodiode should be positioned at least one centi- meter away from an IR optical window and equipment case to insure that direct sunlight does not impinge onto the photodiode surface. APPLICATIONS HINTS |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |