PS-

@S(R)/-31

3

Mounting

■ PS-3S Electrode Holders

Note: 1. OMRON does not sell couplings.

2. Screw in the Electrode until it reaches the bottom of the nut. Insufficient insertion will cause a faulty connection.

1. Mounting Electrode Holder

2. Attaching Electrode(s) to Electrode section

3. Inserting Electrode section into Electrode

Holder

• Screw the Electrode Holder into the coupling

secured at the installation location.

• Insert each Electrode into the connecting nut,

secure the Electrode with the clamp screws,

and then tighten the lock nut.

• Connect the leads, inserted through the hole

of the rubber bushing, into the respective ter-

minals.

• Fit the Electrode section into the Electrode

Holder and secure it with the two screws.

• Check the Electrode section for proper wir-

ing, fit the rubber bushing in position, and

then cover the Electrode Holder with the drip-

proof cover.

Twin

clockwise

Electrode

Holder

Coupling

Electrode section

housing

Rubber

bushing

Electrode

Lock nut

Drip-proof

cover

Electrode

section

housing

Electrode

Holder