www.ti.com

Ceramic Capacitors

Tantalum Capacitors

Capacitor Table

PTH03010Y

PTH05010Y

PTH12010Y

SLTS223A–MARCH 2004–REVISED OCTOBER 2005

APPLICATION INFORMATION (continued)

Above 150 kHz the performance of aluminum electrolytic capacitors becomes less effective. To further improve

the reflected input ripple current or the output transient response, multilayer ceramic capacitors can be added.

Ceramic capacitors have very low ESR and their resonant frequency is higher than the bandwidth of the

regulator. When used on the output their combined ESR is not critical as long as the total value of ceramic

capacitance does not exceed 300 µF. Also, to prevent the formation of local resonances, do not place more than

five identical ceramic capacitors in parallel with values of 10 µF or greater.

Tantalum type capacitors can be used at both the input and output, and are recommended for applications where

the ambient operating temperature can be less than 0°C. The AVX TPS, Sprague 593D/594/595, and Kemet

T495/T510 capacitor series are suggested over many other tantalum types due to their higher rated surge, power

dissipation, and ripple current capability. As a caution, many general-purpose tantalum capacitors have

considerably higher ESR, reduced power dissipation and lower ripple current capability. These capacitors are

also less reliable as they have lower power dissipation and surge current ratings. Tantalum capacitors that do not

have a stated ESR or surge current rating are not recommended for power applications.

When specifying Os-Con and polymer tantalum capacitors for the output, the minimum ESR limit is encountered

before the maximum capacitance value is reached.

Table 1 identifies the characteristics of capacitors from a number of vendors with acceptable ESR and ripple

current (rms) ratings. The recommended number of capacitors required at both the input and output buses is

identified for each capacitor type.

This is not an extensive capacitor list. Capacitors from other vendors are available with comparable

specifications. Those listed are for guidance. The RMS ripple current rating and ESR (at 100 kHz) are critical

parameters necessary to ensure both optimum regulator performance and long capacitor life.

Table 1. Input/Output Capacitors(1)

Capacitor Characteristics

Quantity

Max Ripple

Capacitor Vendor,

Vendor

Working

Max ESR

Physical

Value

Current

Input

Output

Type/Series (Style)

Part Number

Voltage

at 100 kHz

Size

(µF)

at 85°CBus

Bus

(V)

(Ω)

(mm)

(Irms) (mA)

Panasonic, Aluminum

FC (Radial)

10

470

0.117

555

8 × 11,5

1

1

EEUFC1A471

FC (SMD)

10

470

0.150

670

10 × 10,2

1

1

EEUFC1A471P

FK (SMD)

10

470

0.160

600

8× 10,2

1

1

EEVFK1A471P

United Chemi-Con

PXA, Poly-Aluminum (SMD)

6.3

470

0.020

4130

10 × 7,7

1

≤2

PXA6.3VC471MJ80TP

PS, Poly-Aluminum (Radial)

10

470

0.012

5300

10 × 12,5

1

≤1

10PS470MJ12

LXZ, Aluminum (Radial)

16

470

0.120

555

8 × 12

1

1

LXZ10VB471M8X12LL

Nichicon Aluminum

WG(SMD)

10

470

0.150

670 mA

10 × 10

1

1

UWG1A471MNR1GS

HD (Radial)

10

470

0.072

760

8 × 11,5

1

1

UHD1A471MPR

PM (Radial)

10

470

0.130

600

10 × 12,5

1

1

UPM1A471MPH6

(1) Capacitor Supplier Verification

Please verify availability of capacitors identified in this table. Capacitor suppliers may recommend alternative part numbers because of

limited availability or obsolete products. In some instances, the capacitor product life cycle may be in decline and have short-term

consideration for obsolescence.

RoHS, Lead-free and Material Details

Please consult capacitor suppliers regarding material composition, RoHS status, lead-free status, and manufacturing process

requirements. Component designators or part number deviations can occur when material composition or soldering requirements are

updated.

8