This transparent metal-in static shielding bag is designed to provide a

static safe environment for ESD sensitive electronic devices. Bags are

printed with an ESD protective symbol and a lot code for traceability.

Open top (1000 Series) and ZipTop (3000 Series) styles are available.

The bags are heat sealable.

SCS Static Shielding Bags 1000 Series are manufactured from a

polyester, metal, polyethylene laminate. The polyester dielectric in

concert with the metal layer provides discharge shielding. The exterior

being static dissipative allows electrostatic charges to be removed

when grounded.

DRAWING

NUMBER

1000 Series

DATE

April

2019

© 2019 DESCO INDUSTRIES INC

Employee Owned

1000 SERIES STATIC SHIELDING BAG

926 JR Industrial Drive, Sanford, NC 27332

WEB SITE: StaticControl.com

PHONE (919) 718-0000 | WEST: (909) 627-9634

Static Shielding Bag 1000 Series

Physical

Typical Value

Testing Method

Tensile Strength

4600 PSI, 32 MPa

ASTM D882

Puncture Resistance

12 lbs, 53 N

MIL-STD-3010C Method

2065

Seal Strength

11 lbs, 48 N

ASTM D882

Thickness

2.8 mils, 0.071 mm +/-10%

MIL-STD-3010C Method

1003

Marking Adhesion

Pass

IPC-TM-650 2.4.1

Transparency

40%

Tobias

Electrical

Typical Value

Testing Method

ESD Shielding

<10 nJ

ANSI/ESD STM11.31

Surface Resistance -

Interior

1 x 104 to < 1 x 1011 ohms

ANSI/ESD STM11.11

Surface Resistance -

Exterior

< 1 x 1011 ohms

ANSI/ESD STM11.11

Static Decay

< 2 seconds

ETS 406D

Cleanliness

Typical Value

Testing Method

Silicone

Not Detected

FTIR

Heat Sealing Conditions Typical Value

Temperature

300ºF – 375°F, 149ºC – 190°C

Time

0.5 – 3.5 seconds

Pressure

30 – 70 PSI, 206 – 482 KPa

Tolerance: Width -0, +1/4"

Length +/- 1/8" Offset 0 to 1/4"

Seal width 3/8" with a tolerance of +/- 1/8"

Open Top Bag

ZipTop Bag

Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250

Seal width +/- 0.125

Open Top Bag

ZipTop Bag

Made in the

United States of America

This product is intended for commercial use only. This product is not on

the Qualified Product Listing under the Defense Standardization Program.

Specifications and procedures subject to change without notice.

Bag is free of amines, silicones and heavy metals.

Note: Standard bag markings shown

above and are not to scale.

Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and

Static Control Bag ANSI/ESD S11.4 Level 3

7

OTHER

11

PET/ALU/PE

Static Shielding Bag

1000

Discharge Shielding

ATTENTION:

Contents may be Static Sensitive

Handling Precautions Required

LOT 13910987654321

7

OTHER

11

PET/ALU/PE

Static Shielding Bag

1000

Discharge Shielding

ATTENTION:

Contents may be Static Sensitive

Handling Precautions Required

LOT 13910987654321

RoHS, REACH and Conflict Minerals, Statement

See the Desco Industries RoHS, REACH, and Conflict Minerals Statement:

DescoIndustries.com/ROHS3.aspx

See the SCS Limited Warranty:

StaticControl.DescoIndustries.com/Limited-Warranty.aspx