PDIP13UX datasheet(14/42 Pages) BANNER

14 / 42 page

Fiber Systems

176

More information online at

bannerengineering.com

D12 Series

D12 AC-Coupled Specifications

Supply Voltage and Current

10 to 30V dc at 60 mA max. (exclusive of load)

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Output Configuration

Bipolar: one NPN (current sinking) and one PNP (current sourcing) open-collector transistor

Output Rating

150 mA max. each output

Off-state leakage current: less than 10 mA at 30V dc

On-state saturation voltage: less than 1 volt at 10 mA dc and less than 1.5 volts at 150 mA dc

The total load may not exceed 150 mA

Output Protection Circuitry

Protected against false pulse on power-up and short circuit of outputs

Output Response Time

50 microseconds ON/OFF

(NOTE: False pulse protection circuit causes a 0.1 second delay on power-up)

Output Operation Mode

Light operate or dark operate: selected by switch

Output Timing Functions

Pulse output; adjustable from 1 to 70 milliseconds

Repeatability

15 microseconds ON

Adjustments

Three top-panel controls: SENSITIVITY control (15-turn slotted brass screw, clutched at both ends of adjustment),

a light- or dark-operate select switch, and an OUTPUT PULSE adjustment (3/4-turn potentiometer)

Indicators

Three top-mounted LED indicators:

Green LED lights to indicate dc Power ON

Yellow LED lights for Output Conducting

Red LED lights whenever AGC system is locked onto the signal

Mounting Bracket

D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounting

bracket and M3 x 0.5 hardware

Construction

Black ABS housing with acrylic cover, stainless steel M3 x 0.5 hardware for use with thermoplastic polyester

mounting bracket (supplied); the plastic fiber clamping element is Acetal

Environmental Rating

Rated NEMA 4; IEC IP66

Connections

PVC-jacketed 2 m or 9 m cables, or 150 mm pigtail with 4-pin Pico-style quick-disconnect (QD) are available. QD

cables are ordered separately. See page 378.

Operating Conditions

Temperature: -40° to +70° C

Relative humidity: 90% at 50° C (non-condensing)

Application Note

D12 AC-coupled sensors should not be used in areas of known electrical “noise” or RF fields.

Hookup Diagrams

DC06 (p. 477)

PDIP13UX Datasheet(PDF) 14 Page - Banner Engineering Corp.

PDIP13UX Datasheet(HTML) 14 Page - Banner Engineering Corp.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Datasheet Download

Link URL