PDIP16UX datasheet(8/42 Pages) BANNER

8 / 42 page

Fiber Systems

170

More information online at

bannerengineering.com

D10 Series

D10 Expert™ with Numeric Display—Analog/Discrete Specifications

Construction

Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.

Environmental Rating

NEMA 1; IEC IP50

Connections

PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect, QD cables are ordered

separately. See page 379.

Operating Conditions

Temperature: -20° to +55° C Storage Temperature: -20° to +80° C Relative humidity: 90% @ 50° C

Number of Devices Stacked

Ambient Temperature Rating

Load Specification

55° C

150 mA

50° C

50 mA

45° C

50 mA

Installation

35 mm DIN rail or included mounting bracket

Certifications

Hookup Diagrams

D10INFP(Q) Current & NPN Models: DC23 (p. 481)

D10UNFP(Q) Current & PNP Models: DC25 (p. 482)

D10IPFP(Q) Voltage & NPN Models: DC24 (p. 481)

D10UPFP(Q) Voltage & PNP Models: DC26 (p. 482)

D10 Expert™ with Bargraph Display—Discrete Specifications

Required Fiber Optic Cable

Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182)

Supply Voltage and Current

10 to 30V dc (10% max. ripple) at less than 45 mA, exclusive of load

Supply Protection Circuitry

Protected against reverse polarity, over voltage and transient voltage.

Delay at Power Up

200 milliseconds max.; outputs do not conduct during this time

Output Configuration

Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN)

Output Rating

150 mA max. load

OFF-state leakage current: less than 5 µA at 30V dc

ON-state saturation voltage:

NPN less than 200 mV at 10 mA and 1V at 150 mA load

PNP less than 1V at 10 mA and 1.5V at 150 mA load

Output Protection Circuitry

Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power-up

Output Response Time

500 microseconds (normal mode) or 200 microseconds (high-speed mode)

Repeatability

100 microseconds (normal mode) or 66 microseconds (high-speed mode)

Adjustments

Two push buttons and remote wire

• Expert TEACH programming (two-point static, dynamic and single-point static)

• Manually Adjust (+/–) sensitivity (from buttons only – not available on remote wire)

• LO/DO, OFF Delay, and response speed configurable (from buttons or remote wire)

• Push-button lockout (from remote wire only)

Factory Default Settings: Light Operate, Normal Speed, No Delay

Indicators

8-segment red bargraph: Light-to-dark signal difference relative to taught condition (single-point TEACH )

Sensing contrast (two-point TEACH)

Green Status Indicators: LO, DO, High Speed (HS) and OFF Delay

Green LED: Power ON

Yellow LED: Output conducting

Construction

Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.

Environmental Rating

NEMA 1; IEC IP50

Connections

PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect. QD cables are ordered

separately. See page 379.

Operating Conditions

Temperature: -10° to +55° C Storage Temperature: -20° to +85° C Relative humidity: 90% @ 50° C

Installation

35 mm DIN rail or included mounting bracket

Certifications

Hookup Diagrams

DC11 (p. 478)

D10 Expert™ with Numeric Display—Analog/Discrete (cont’d)

PDIP16UX Datasheet(PDF) 8 Page - Banner Engineering Corp.

PDIP16UX Datasheet(HTML) 8 Page - Banner Engineering Corp.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Datasheet Download

Link URL