640468 datasheet(59/66 Pages) TEC

59 / 66 page

PAGE 59

MTA, CST-100 II and SL-156 Connectors

MTA Application Tooling Options (Continued)

Interchangeable Head

• Terminates one

unstripped wire per cycle

• Aligns and holds the

connector in place for

each termination

• Automatically advances

the connector after each

termination

Interchangeable Head and

Loose-Piece Feed Track

• No special setup required

• Connectors are easily

loaded into feed track

• Connectors are fed using

a simple spring-loaded

pusher

Interchangeable Head and

Tape Feed Track

• No special setup required

• Tape-mounted connectors

are transferred from prod-

uct reel to feed track by

simply pulling on the free

end of the carrier tape

• Connectors are fed using

a simple spring-loaded

pusher

Special Applicator

• Connectors are easily

hand loaded into feed

track

• Automatically advances

the connector after each

termination

• Cannot be cycled until

the connector is properly

positioned

Manual Hand Tool with

Interchangeable Head

Air Bench Mount Tool with

Interchangeable Head and

Foot Switch

Air Hand Tool with

Interchangeable Head

Electric Bench Machine with

Interchangeable Head

One-At-A-Time Termination Tooling

(Typical Tooling Combinations)

Air Bench Mount Tool with

Interchangeable Head and Loose-Piece Feed Track

Electric Bench Machine with

Interchangeable Head and

Tape Feed Track

AMP-O-LECTRIC Bench

Machine with Special Applicator

Power Units

Manual Hand Tool —

Pistol Grip Handle

Part No. 58074-1

• Easy to use

• Ratchet control will not

release the trigger until it

is fully bottomed

• Head may be rotated for

user convenience

Air Hand Tool — Pistol

Grip Pneumatic Handle

Part No. 58075-1

• Light weight

• Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

• Head may be rotated for

user convenience

Air Bench Mount Tool —

Bench Mount Power

Assembly Part No. 58338-1

• May be mounted with

interchangeable head

pointed up or down

• Operated bya foot

switch

• Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

Electric Bench Machine —

IDC Power Unit

Part No. 931800-1

• All electric: 120 VAC,

60 Hz, 2 A

• Compact, portable and

quiet

• Operated bya foot

switch

T-Handle Maintenance Tool

Interchangeable Heads and Applicators (Refer to page 58 for part numbers.)

640468 Datasheet(PDF) 59 Page - TE Connectivity Ltd

640468 Datasheet(HTML) 59 Page - TE Connectivity Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Datasheet Download

Link URL