DATA SHEET

www.elma.com

2/2

Ordering Number

563

_

_

_

_

_

_

_

_

_

_

_

_

_

_

-

_

_

_

5632.3 6U VPXQuadDrive.- Rev1 - 12.3.19

SINGLE SLOT 6U VPX BOARD

5632/3 6Gbps QUAD DRIVE CARRIER

BLOCK DIAGRAM

ENVIRONMENTALS

General

The 5632/3 are 5HP single slot 6U VPX storage modules supporting quad

SATA III 6Gbps drives.

Input/Output

The 5632/3 can be directly attached to a host single board computer or it

can be used as part of an extensible multi-slot storage array when connected

to a RAID controller host SATA ports via J3 and a rear transition module

(model 6050-RTM).the host SATA ports via P4 and a rear transition module.

Compatibility

The 5632/3 are directly compatible with 6U VPX systems including single board

computers with 1 to 4 external SATA ports, system backplanes and chassis.

Power Requirements

Input Power

• Typical Power +5V @ .45A

• Media power not included

• Media +5V

Standard Operating Temp:

0°C to 55°C

Extended Operating Temp:

-45°C to +75°C

Non-operating:

-45°C to +85°C

Operating Shock (SSD only):

20G 11ms

Operating Vibration (SSD only):

5G 10 to 2000 Hz

Humidity:

5 to 95%, non-condensing

All configurations of the 5632/3 family are RoHS compliant.

17

Temperature Requirements

S = 0°C to +55°C

E = -40°C to +75°C convection cooled

or conduction cooled (with extended solid

state drives)

O = Other

Conformal Coating

Y/N

16

Air or conduction cooled

RSD= standard duty rotating

RED= enhanced duty rotating

RXD= extended duty rotating

SSS= commercial solid state SLC

SSM= commercial solid state MLC

STS=extended temp solid state SLC

STM=extended temp solid state MLC

11, 12, 13

Drive RPM

54

72

00 (solid state drive)

9, 10

5, 6, 7, 8) 2.5” Drive capacity,

all drives same capacity

xxG

xxxT

Example

500G = 500GB drive

012T = 1.2TB drive

5, 6, 7, 8

ORDERING INFORMATION

Air or conduction cooled

2 = air cooled (faceplate)

3 = conduction cooled (no faceplate)

4

*Consult Elma for the complete range of available drive capacities.

**Standard configuration includes 5HP with REDI covers and offset faceplate

Standard configuration includes four drives.

The model description on all quotes must include any other specific drive

attributes necessary to fulfilling the application requirement.

Signal ground isolation (Some ap-

plications may require signal

ground isolation)

Y/N

15

REDI Side Covers

standard configuration includes primary

and secondary covers**

B = primary and secondary side covers

for conduction or convection cooled ver-

sions, 5HP configuration is standard

14

4

5

6

7

8

9

10

11

12

13

14

15

16

17

-

18

19

20

(18-20 Project Spec)

© Copyright 2019 by Elma Electronic, Inc. Subject to technical modifications, all data supplied without liability.

Please contact our sales team for more details.

China: +86 21 5866 5908

France: +33 388 56 72 50

Germany: +49 7231 97 34 0

Israel: +972 3 930 50 25

Singapore: +65 6479 8552

Switzerland: +41 44 933 41 11

United Kingdom: +44 1234 838 822

United States: +1 510 656 3400