ISO7760FDWR datasheet(21/52 Pages) TI2

21 / 52 page

5.17 Switching Characteristics—2.5-V Supply

VCC1 = VCC2 = 2.5 V ±10% (over recommended operating conditions unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

ISO776x

tPLH, tPHL

Propagation delay time

See Figure 6-1

7.5

PWD

Pulse width distortion(1) |tPHL – tPLH|

0.6

5.9

tsk(o)

Channel-to-channel output skew time(2)

Same-direction channels

4.4

tsk(pp)

Part-to-part skew time(3)

5.3

Output signal rise time

See Figure 6-1

3.5

Output signal fall time

3.5

tDO

Default output delay time from input power loss

Measured from the time VCC goes

below 1.7V. See Figure 6-2

0.1

0.3

μs

tie

Time interval error

216 – 1 PRBS data at 100 Mbps

1.3

(1)

Also known as pulse skew.

(2)

tsk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same

direction while driving identical loads.

(3)

tsk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same

direction while operating at identical supply voltages, temperature, input signals and loads.

www.ti.com

ISO7760, ISO7761, ISO7762, ISO7763

SLLSER1H – AUGUST 2017 – REVISED JANUARY 2024

Submit Document Feedback

Product Folder Links: ISO7760 ISO7761 ISO7762 ISO7763

ISO7760FDWR Datasheet(PDF) 21 Page - Texas Instruments

ISO7760FDWR Datasheet(HTML) 21 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datasheet Download

Link URL