LM741

www.ti.com

SNOSC25D – MAY 1998 – REVISED OCTOBER 2015

10 Layout

10.1 Layout Guidelines

As with most amplifiers, take care with lead dress, component placement, and supply decoupling in order to

ensure stability. For example, resistors from the output to an input should be placed with the body close to the

input to minimize pick-up and maximize the frequency of the feedback pole by minimizing the capacitance from

the input to ground. As shown in Figure 3, the feedback resistors and the decoupling capacitors are located close

to the device to ensure maximum stability and noise performance of the system.

10.2 Layout Example

Figure 3. LM741 Layout

Copyright © 1998–2015, Texas Instruments Incorporated

Submit Documentation Feedback

11

Product Folder Links: LM741