Use limitation

Ŕ Never modify or alter this product

Ŕ Do not use this product against hazards other

than those specified in this document

Ŕ These products are not suitable for grinding or welding

Ŕ These products are NOT designed to be worn over

prescription spectacles

Standards and approval

These products are type examined by Certottica SCRL,

Ufficio Commerciale - test e certificazione, ZI Villanova K32013

Longarone BL, Italy, (Notified body number 0530).

These products are CE marked to the requirements of European

Regulation (EU) 2016/425.

The applicable legislation can be determined by reviewing

the Certificate and Declaration of Conformity

at

www.3M.com/Eye/certs

Materials listing

Component

Material

Lens

Polycarbonate

Frame

Polycarbonate/polyester

Screws

Stainless steel

Marking

The products have demonstrated compliance with the requirements

of EN 166:2001 and associated standards and bear the following marks:

Product ref

(short ID)

Lens marking

Frame marking

SF101AS-BLK

2C-1.2 3M 1 FT

3M EN 166 FT

SF101AF-BLK

2C-1.2 3M 1 FT

3M EN 166 FT

SF101AF-BLU

2C-1.2 3M 1 FT

3M EN 166 FT

SF101AS-BLU

2C-1.2 3M 1 FT

3M EN 166 FT

SF102AF-BLU

5-3.1 3M 1 FT

3M EN 166 FT

SF103AF-BLU

2C-1.2 3M 1 FT

3M EN 166 FT

SF107AF-BLU

5-1.7 3M 1 FT

3M EN 166 FT

Explanation of marking

Marking

Description

2C-1.2

(EN 170:2002)

UV protection with good colour recognition. This product conforms to the requirements of the standard,

providing UV protection for the complete specified range (210nm – 365nm)

5-1.7, and 5-3.1

(EN 172:1994 (as amended))

Sun-glare protection conforming to the requirements of the standard, providing UV protection for the

complete specified range (280nm – 350nm)

1

Optical class

F

Impact protection against high speed particle at low energy (45m/s)

T

Tested for impact protection at extreme temperature conditions -5°C and +55°C

3M™ SecureFit™ SF100 Series Safety Glasses

Please recycle. Printed in the UK. © 3M 2020. 3M and SecureFit

are trademarks of 3M Company. All rights reserved. OMG132915

IMPORTANT NOTICE

The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent

professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.

All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products

or environment. Any action or usage of this product made in violation of this document is at the risk of the user.

Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional

guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be

observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain

external to its decision and control.

Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty

or compensation.

For more information on 3M products and services please contact 3M.

Personal Safety Division

3M United Kingdom PLC

3M Centre, Cain Road

Bracknell, Berkshire RG12 8HT

Tel.: 0870 60 800 60

www.3M.eu/Safety

3M Ireland Limited

The Iveagh Building

Carrickmines Park

Carrickmines

Dublin 18

t: 1 800 320 500