OPA320AIDBVT datasheet(29/58 Pages) TI2

29 / 58 page

OPA320, OPA2320, OPA320S, OPA2320S

www.ti.com

SBOS513F – AUGUST 2010 – REVISED DECEMBER 2016

Product Folder Links: OPA320 OPA2320 OPA320S OPA2320S

Submit Documentation Feedback

11 Device and Documentation Support

11.1 Device Support

11.1.1 Development Support

11.1.1.1 TINA-TI™ (Free Software Download)

TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI™ is

a free, fully-functional version of the TINA software, preloaded with a library of macro models in addition to a

range of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency

domain analysis of SPICE, as well as additional design capabilities.

Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing

capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select

input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.

NOTE

These files require that either the TINA software (from DesignSoft™) or TINA-TI software

be installed. Download the free TINA-TI software from the TINA-TI folder.

11.1.1.2 DIP Adapter EVM

The DIP Adapter EVM tool provides an easy, low-cost way to prototype small surface mount ICs. The evaluation

tool these TI packages: D or U (8-pin SOIC), PW (8-pin TSSOP), DGK (8-pin VSSOP), DBV (6-pin SOT-23, 5-

pin SOT23, and 3-pin SOT-23), DCK (6-pin SC-70 and 5-pin SC-70), and DRL (6-pin SOT-563). The DIP

Adapter EVM may also be used with terminal strips or may be wired directly to existing circuits.

11.1.1.3 Universal Op Amp EVM

The Universal Op Amp EVM is a series of general-purpose, blank circuit boards that simplify prototyping circuits

for a variety of IC package types. The evaluation module board design allows many different circuits to be

constructed easily and quickly. Five models are offered, with each model intended for a specific package type.

PDIP, SOIC, VSSOP, TSSOP and SOT-23 packages are all supported.

NOTE

These boards are unpopulated, so users must provide their own ICs. TI recommends

requesting several op amp device samples when ordering the Universal Op Amp EVM.

11.1.1.4 TI Precision Designs

TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the

theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and

measured

performance

many

useful

circuits.

Precision

Designs

are

available

online

http://www.ti.com/ww/en/analog/precision-designs/.

11.1.1.5 WEBENCH® Filter Designer

WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH

Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive

components from TI's vendor partners.

Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to

design, optimize, and simulate complete multistage active filter solutions within minutes.

OPA320AIDBVT Datasheet(PDF) 29 Page - Texas Instruments

OPA320AIDBVT Datasheet(HTML) 29 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Datasheet Download

Link URL