| Electronic Components Datasheet Search |
|
PCM2704CDB Datasheet(PDF) 28 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
PCM2704CDB Datasheet(HTML) 28 Page - Texas Instruments |
|
28 / 53 page ![]() PCM2704C, PCM2705C, PCM2706C, PCM2707C SBFS036B – MAY 2015 – REVISED AUGUST 2015 www.ti.com Table 7. Interface Number 1 Parameters ALTERNATIVE TRANSFER SAMPLING RATE DATA FORMAT SETTING MODE (kHz) 00 Zero bandwidth 01 16-bit Stereo 2's complement (PCM) Adaptive 32, 44.1, 48 02 16-bit Mono 2's complement (PCM) Adaptive 32, 44.1, 48 9.5.1.4 Interface Number 2 (HID Interface) Interface number 2 is the interrupt-data-in interface. The HID consumer control device consists of interface number 2. Alternative setting number 0 is the only possible setting for interface number 2. On the HID device descriptor, eight HID items are reported for any model, in any configuration. 9.5.1.4.1 HID Items Reported 9.5.1.4.1.1 Basic HID Operation Interface number 2 can report these three key statuses for any model. These statuses can be set by the HID0 through HID2 pins (PCM2704C/6C) or the SPI port (PCM2705C/7C). • Mute (0xE2) • Volume up (0xE9) • Volume down (0xEA) 9.5.1.4.1.2 Extended HID Operation (PCM2705/6/7) By using the FUNC0 through FUNC3 pins (PCM2706C) or the SPI port (PCM2705C/7C), these additional conditions can be reported to the host. • Play/Pause (0xCD) • Stop (0xB7) • Previous (0xB6) • Next (0xB5) 9.5.1.4.1.3 Auxiliary HID Status Report (PCM2705C/7C) One additional HID status can be reported to the host though the SPI port. This status flag is defined by SPI command or external ROM. This definition must be described as on the report descriptor with a three-byte usage ID. AL A/V Capture (0x0193) is assigned as the default value for this status flag. 9.5.1.5 Endpoints The PCM2704C/5C/6C/7C has three endpoints: • Control endpoint (EP number 0) • Isochronous-out audio data-stream endpoint (EP number 2) • HID endpoint (EP number 5) The control endpoint is a default endpoint. The control endpoint controls all functions of the PCM2704C/5C/6C/7C by standard USB request and USB audio-class-specific request from the host. The isochronous-out audio data-stream endpoint is an audio sink endpoint that receives the PCM audio data. The isochronous-out audio data-stream endpoint accepts the adaptive transfer mode. The HID endpoint is an interrupt-in endpoint. The HID endpoint reports HID status every 10 ms. The HID endpoint is defined as a consumer-control device. The HID function is designed as an independent endpoint from the isochronous-out endpoint. This configuration means that the effect of HID operation depends on the host software. Typically, the HID function controls the primary audio-out device. 28 Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: PCM2704C PCM2705C PCM2706C PCM2707C |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |