LIFT STAGES | MPS-SV SERIES

aerotech.com

MPS-SV Series Miniature Mechanical-Bearing Screw-Driven Lift Stage (Required)

MPS50SV-5

MPS50SV-5 miniature mechanical-bearing screw-driven lift stage, 5 mm travel

MPS75SV-5

MPS75SV-5 miniature mechanical-bearing screw-driven lift stage, 5 mm travel

Drive Screw (Required - MPS50SV-5 only)

-BS

Precision-ground ball screw, 1 mm/rev

-LS

Precision-ground lead screw, 0.5 mm/rev

Note: -LS Lead screw option is valid only on MPS50SV-5.

Vacuum Preparation (Optional)

-HV

High vacuum preparation to 10-6 torr

Motor (Required)

-M1

DC servomotor

-M2

Stepper motor

Mounting Plate (Optional)

-MP

Optical table mounting plate

Metrology (Required)

-PL0

No metrology performance plots

-PL1

Metrology, uncalibrated with performance plots

-PL2

Metrology, calibrated (HALAR) with performance plots

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The

following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is

required, or if you desire custom integration support with your system.

-TAS

Integration - Test as system

Testing, integration, and documentation of a group of components as a complete system that will

be used together (ex: drive, controller, and stage). This includes parameter file generation, system

tuning, and documentation of the system configuration.

-TAC

Integration - Test as components

Testing and integration of individual items as discrete components. This is typically used for spare

parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These

components may or may not be part of a larger system.

MPS-SV Series

Ordering Information