D-32

Submersible Flat Surface pH/ORP Electrodes

Submersion Electrodes

The OMEGA® PHE/ORE-6510B submersible electrodes are

designed for use in drums, open tanks and streams. The flat

sensing surface is surrounded by a porous polyethylene reference

junction which minimizes fouling. Electrode installation and removal

done by a simple ¹⁄₄ turn quick disconnect. The cable assembly’s

cap has ¹⁄₂ MNPT thread, which can be connected to a coupling

and support pipe. The pipe allows easy mechanical mounting

and protects the cable from the liquid measured. The resulting

assembly is lightweight for convenient handling when maintenance

is needed. ATC is available as part of the mounting assembly.

U

CPVC or PVDF Construction

U

Designed For Mounting in Tanks,

Flumes, and Streams

U

Easy Mounting in Tanks

U

Acrylamide Gel Standard

PHE-6510B Series

Specifications

Maximum Temperature

87°C (190°F) CPVC body 100°C (212°F) PVDF body

Available Options:

“

-HF” Fluoride resistant

“

-LC” Low conductivity

“

-GL” Ground loop, for additional cost

PHE-6510B enlarged

PHE-6510B (above) and

PHEH-65-10 (above right),

both shown smaller

than actual size.

The flat surface design is well suited for applications with relatively

high suspended solids or where flocculation operations require low

velocities.

Where only low velocities are present and coating is a problem, the

electrode can be mounted at a 45° angle facing the flow so as to

obtain increased scrubbing action across the measuring surface.