https://www.phoenixcontact.com/gb/products/2702975

02/27/2020   Page 1 / 9

Safety switch sensor - PSR-CT-M-SEN-1-8 - 2702975

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Proximity safety circuit up to Cat. 4, PL e (EN ISO 13849), SIL 3 (IEC 61508), multicode sensor with RFID

coding, model 4 (EN ISO 14119), automatic or manual start, integrated diagnostics, 24 V DC supply, IP69K,

M12 connector

The figure shows a product version

of the article

Product Description

The PSR-CT safety circuit consists of a combination of a PSR-CT-...-SEN-1-8 sensor with varying coding types and a coded PSR-CT-C-ACT

actuator. It provides maximum tamper protection and the highest level of safety in accordance with EN ISO 14119. The PSR-CT safety circuit is

available with the following types of coding: 

Fixcode: For the sensor to detect the actuator, the actuator must first be associated with the sensor via a learning process. The learning process

can only be completed once. The sensor and actuator are then permanently assigned to each other by their coding. Safety circuits with fixcode

evaluation achieve a high coding level. 

Unicode: For the sensor to detect the actuator, the actuator must first be assigned to the sensor via a learning process. The learning process for

a new actuator can be repeated any number of times. The sensor only detects the last learned actuator. Safety circuits with unicode evaluation

achieve a high coding level. 

Multicode: The sensor detects every actuator of the approved type. No specific actuator code can be assigned. Safety circuits with multicode

evaluation achieve a low coding level.

Your advantages

 Integrated reset function on the switch

 4 actuation settings, 3 travel directions

 Tamper protection via RFID transponder technology

 Rapid diagnostics, thanks to comprehensive status information

 Consistent M12 connection technology for convenient installation

 Safe series connection in accordance with EN ISO 14119

 Flexible use, thanks to compact design

 Safe, cost-effective complete solution

Key Commercial Data

Packing unit

1 pc

GTIN

GTIN

4055626447025

Weight per Piece (excluding packing)

41.600 g