• Case : polyamide

• Plunger : polyamide

• Bushing : brass, nickel plated

• Contacts :

A : silver

C : copper, silver plated

APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.

MATERIALS

• Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut

• Panel thickness : 5 mm (.196) max.

• Total travel :

NO : 4.5 mm (.177) ± 0.3 (.011)

NC : 3.5 mm (.137) ± 0.3 (.011)

• Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F)

GENERAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- silver contacts (A) : 4 A 250 VAC - 8 A 125 VAC - 4 A 24 VDC - 8 A 12 VDC

- silver plated copper contacts (C) :

2 A 250 VAC - 3 A 125 VAC - 2 A 24 VDC - 3 A 12 VDC

• Initial contact resistance : 10 mΩ

• Insulation resistance : 1,000 MΩ min. at 500 VDC

• Dielectric strength :

2,000 Vrms 50 Hz min. between terminals

3,000 Vrms 50 Hz min. between terminals and frame

• Electrical life : 10,000 cycles at full load

ELECTRICAL SPECIFICATIONS

Butt action contacts

Double break

NF (EN 61058-1), UL and CSA approved

DISTINCTIVE FEATURES

1200 series

Momentary pushbutton switches •

round plunger

The company reserves the right to change specifications without notice.

1

SW-1200-1808