RF2360PCBA datasheet(4/12 Pages) RFMD

4 / 12 page

4 of 12

RF2360

Rev A12 DS070731

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

Function

Description

Interface Schematic

1NC

No connection. This pin should be connected to the ground plane.

2NC

Same as pin 1.

3GND

Ground connection. Keep traces physically short and connect immediately

to ground plane for best performance. Each ground pin should have a via

to the ground plane.

4GND

Same as pin 3.

5GND

Same as pin 3.

6RF IN

RF input pin. This pin is internally DC blocked. An external DC blocking

capacitor is not required.

7NC

Same as pin 1.

8NC

Same as pin 1.

9NC

Same as pin 1.

GND

Same as pin 3.

GND

Same as pin 3.

RF OUT

RF output and bias pin. Because DC is present on this pin, a DC blocking

capacitor, suitable for the frequency of operation, should be used in most

applications. For biasing, only an RF choke is needed.

Same as pin 1.

RF OUT

RF IN

RF2360PCBA Datasheet(PDF) 4 Page - RF Micro Devices