AD797

Rev. F | Page 5 of 20

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Ratings

Supply Voltage

±18 V

Internal Power Dissipation @ 25°C1

PDIP

SOIC

Input Voltage

Differential Input Voltage2

±0.7 V

Output Short-Circuit Duration

Indefinite within

maximum internal

power dissipation

Storage Temperature Range

(N, R Suffix)

−65°C to +125°C

Operating Temperature Range

−40°C to +85°C

Lead Temperature Range

(Soldering 60 sec)

300°C

noise, internal current-limiting resistors are not incorporated into the design

of this amplifier. If the differential input voltage exceeds ±0.7 V, the input

current should be limited to less than 25 mA by series protection resistors.

Note, however, that this degrades the low noise performance of the device.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION