2 / 6 page

B9948L
Document #: 38-07080 Rev. *C
Page 2 of 6
Note:
1.
PD = Internal Pull-Down, PU = Internal Pull-Up.
Output Enable/Disable
The B9948L features a control input to enable or disable the
outputs. This data is latched on the falling edge of the input
clock. When SYNC_OE is asserted LOW, the outputs are dis-
abled in a LOW state. When SYNC_OE is set HIGH, the out-
puts are enabled as shown in Figure 1.
Pin Description[1]
Pin
Name
PWR
I/O
Description
3
PECL_CLK
I, PU
PECL Input Clock.
4
PECL_CLK#
I, PD
PECL Input Clock.
2
TCLK
I, PU
External Reference/Test Clock Input.
9, 11, 13, 15, 17,
19, 21, 23, 25, 27,
29, 31
Q(11:0)
VDDC
O
Clock Outputs.
1
TCLK_SEL
I, PU
Clock Select Input. When LOW, PECL clock is selected and
when HIGH TCLK is selected.
5
SYNC_OE
I, PU
Output Enable Input. When asserted HIGH, the outputs are
enabled and when set low the outputs are disabled in a LOW
state.
6
TS#
I, PU
Three-state Control Input. When asserted LOW, the output
buffers are three-stated. When set HIGH, the output buffers
are enabled.
10, 14, 18, 22, 26,
30
VDDC
2.5V or 3.3V Power Supply for Output Clock Buffers.
7
VDD
3.3V Power Supply.
8, 12, 16, 20, 24,
28, 32
VSS
Common Ground.
TCLK
SYNC_OE
Q
Figure 1. SYNC_OE Timing Diagram