Spectrum Analyzers

2680 Series

4

www.bkprecision.com

Options

PC software

Use 3D spectrum monitoring with the PC software.

Generate test reports

Expand control of the spectrum analyzer with

front panel emulation. Create, load or save user

defined limit and correction files, save screen

captures and store readings from the included

software.

Reflection bridge

Quasi-peak detection with dwell time helps identify

non-compliant emissions.

Use the provided EMI software (available for download

at www.bkprecision.com) to configure the spectrum

analyzer, perform prescan, peak search, final scan and

generate reports of your pre-compliance tests.

Visualize return loss, reflection coefficient, and VSWR

of your DUT.

This option enables VSWR, reflection

coefficient, and return loss measurements for

tuning and determining the efficiency of

antennas, filters, or RF transmission modules.

Reflection measurement option

This option enables the instrument’s EMI

measurement function which includes

pre-defined bandwidth set points of 200 Hz,

9 kHz and 120 kHz, a -6dB EMI filter, and the

quasi-peak detector as specified by CISPR 16-1.

EMI pre-compliance option

The RF energy radiating from a device can be

detected and measured with near field probes and

the spectrum analyzer. The wide band amplifier

can be connected between the probe and the

2680 Series to increase the dynamic range of the

measurement system. The probes can also be

used to test RF immunity by inducing signal into

the circuit.

Near field probe kit

Use near field probes to help track down emissions.

Magnetic (H) and electric (E) near field probes with

40 dB pre-amplifier

Order information for instrument options

Order number

Description

EMI2680

License key, activates EMI measurements with Quasi-peak

RFL2680

License key, activates reflection measurements

RB2680

Reflection bridge with adapters

PR262

1 electric and 3 magnetic field probes with amplifier and SMA cable

Buy now, upgrade later

Install the licenses at any time or try before you buy with the 30 day trial license on each

instrument. Installation is quick and easily done within the spectrum analyzer menu. To

purchase a license key, please fill out the license request form which can be found on the

2680 Series accessory page on our website www.bkprecision.com.