
CY29352
Document Number: 38-07476 Rev. *B
Page 2 of 9
Pinouts
Figure 1. Pin Diagram - 32-pin 1.4 mm TQFP package
CY29352
VSS
QB1
QB0
VDDQB
VDDQA
QA4
QA3
VSS
VCO_SEL
SELC
SELB
SELA
MR/OE#
REFCLK
AVSS
FB_IN
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
Notes
1. PD = Internal pull down.
2. A 0.1-
μF bypass capacitor must be placed as close as possible to each positive power pin (< 0.2”). If these bypass capacitors are not close to the pins, the
high frequency filtering characteristics are cancelled by the lead inductance of the traces.
3. AVDD and VDD pins must be connected to a power supply level that is at least equal or higher than that of VDDQA, VDDQB, and VDDQC power supply pins.
Table 1. Pin Definition - 32-pin 1.4 mm TQFP package
Pin
Name
IO[1]
Type
Description
6
REFCLK
I, PD
LVCMOS
Reference clock input
12, 14, 15, 18, 19 QA(0:4)
O
LVCMOS
Clock output bank A
22, 23, 26, 27
QB(0:3)
O
LVCMOS
Clock output bank B
30, 31
QC(0,1)
O
LVCMOS
Clock output bank C
8
FB_IN
I, PD
LVCMOS
Feedback clock input. Connect to an output for normal operation.
This input must be at the same voltage rail as input reference clock,
see Table 2 on page 3.
1
VCO_SEL
I, PD
LVCMOS
VCO divider select input, see Table 3 on page 3.
5
MR/OE#
I, PD
LVCMOS
Master reset or output enable and disable input, see Table 3 on page
3.
9
PLL_EN#
I, PD
LVCMOS
PLL enable and disable input, see Table 3 on page 3.
2, 3, 4
SEL(A:C)
I, PD
LVCMOS
Frequency select input, bank (A:C), see Table 3 on page 3.
16, 20
VDDQA
Supply
VDD
2.5V or 3.3V power supply for bank A output clocks [2,3]
21, 25
VDDQB
Supply
VDD
2.5V or 3.3V power supply for bank B output clocks [2,3]
32
VDDQC
Supply
VDD
2.5V or 3.3V power supply for bank C output clocks [2,3]
10
AVDD
Supply
VDD
2.5V or 3.3V power supply for PLL [2,3]
11
VDD
Supply
VDD
2.5V or 3.3V power supply for core and inputs [2,3]
7AVSS
Supply
Ground
Analog ground
13, 17, 24, 28, 29 VSS
Supply
Ground
Common ground
[+] Feedback